SuzukiSavage.com - Swapping Cam questions

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Swapping Cam questions

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Swapping Cam questions (Read 39 times)

Ed L.

Serious Thumper
Alliance Member

Offline

"We All go a
Little Crazy
Sometimes"
Norman Bates

Posts: 2808
Sunny Florida
Gender: male

Swapping Cam questions
03/09/12 at 18:25:06

I'm planning to swap out the stock cam on my '02 with a stage 1 and have a couple questions. Do I need to pull the timing chain cover for the job?
Also will I have problems with the timing chain tensioner falling apart when I pull the gear from the cam and release the tension.
Just want to get the ducks in a row before I spill oil all over the floor of my shop Wink

Silver '02, clubman handle bars, Cobra headlight, Sportster muffler, K+N stock air filter, 152.5 main, Superbrace, oil cooler, 1/2 inch aluminium plate forward controls, spark advance, goes like stink

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28890 L.A. California Gender:	Re: Swapping Cam questions Reply #1 - 03/09/12 at 18:38:11 yes yes, push it in and put a tab under the latch. you can make a tab from a doubled over zip tie.
Back to top	Versey's Place Tech Section Index IP Logged

Ed L. Serious Thumper Alliance Member Offline "We All go a Little Crazy Sometimes" Norman Bates Posts: 2808 Sunny Florida Gender:	Re: Swapping Cam questions Reply #2 - 03/09/12 at 19:21:49 Thanks, guess I'll be putting on the new timing chain also. If I'm going in that far might as well do everything at once.
Back to top	Silver '02, clubman handle bars, Cobra headlight, Sportster muffler, K+N stock air filter, 152.5 main, Superbrace, oil cooler, 1/2 inch aluminium plate forward controls, spark advance, goes like stink IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home