justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
IF I was determined, Id get a used seat & strip it to the pan, Build a cardboard mockup & figure where to put angle braces on the pan to mount the fiberglass, The underside, I dont think, can be left open. It will need a X in it to make it strong in the side to side area. Y9ou can biuild it, but its not gonna be a one day project.. gonna take some layin in bed & thinking time, what to do & WHEN to do it,, to make it work out..
YOu ever start assembling something only to have to take something back\ apart because something else had to get put together first? Thats "Building yourself a bear trap".. & fabricating something leaves many opportunities for just that,, Think it thru first, all the way,
|