Hello bike people!
I know it's been a while since I've posted anything on the forum. We've been cranking out our custom Savage frames for over two years now with an ever-growing following! I'd post more often, but these ARE production frames and you'd just be looking at the same old pictures again and again.
We do have some news however...
Recently, we've prototyped the Yamaha XS650 frame (SUICIDE) and along the way, calculated that with a few moderate changes, it could be adapted to the LS650 - S40 engine!
Here's a few shots of the XS650 frame in progress:
Here's a shot showing the smooth straight lines of the frame rendering the design a more "classic chopper" feel...
This particular neck tube had to be milled as the stock bearings are a little large on the XS650. In most cases, I will fabricate the frame using the customer's original neck tube with VIN intact just to avoid problems with registration. (Granted he has a clear title!)
The 3/8" axle plates are precision CNC plasma cut and finished to provide a clean application and alignment.
We are specially careful of the dry fitment of all joints in order to provide a solid and clean weld.
Again... The clean lines of the frame!
Prototype design by Voodoo Vintage Fabrication