SuzukiSavage.com - Throttle slop

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Throttle slop

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Throttle slop (Read 53 times)

molo YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 4	Throttle slop 06/02/11 at 07:11:42 I replaced the stock grips with Kuryakyn ISO (6235 universal 1” bars). The cable adjustment is maxed out at both ends but I still have a little slop. Any suggestions? Mike
Back to top	IP Logged

arteacher Serious Thumper Offline Ride as if your naked and invisable! Posts: 2581 London ontario Gender:	Re: Throttle slop Reply #1 - 06/02/11 at 11:36:33 On those grips there are two spots to put the cable into- double check that you put it in the furthest back (to the rear of the bike) slot. I installed them in my '07 with no problem at all. Properly adjusted there should be a max of 4mm play.
Back to top	white '07, Raask exh, Corbin seat, slipstreamer shie, Raptor, Routy's fwd controls, Baron tach, Frisco bars, Isogrips, Headlight and taillight modulators, Dial-a- jet, AME 9 deg chop kit, K&N air flt IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home