justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
Look at the old lamps, use an ohm meter, whatever ya hafta do, but find out which wire goes to the hot ( center , lead button) on the lamp. The other one is ground,, then do the same on the new lamps, Just gotta get hot to hot & ground to ground. As long as the lamps dont ground to the frame, its really no big deal to the light bulb which side is hot..the filament doesnt care.. But Id really rather see ya do it right,, never know how it could affect something. Tools,, every kinda job needs tools, an ohm meter & a test lite are good to have.
|