SuzukiSavage.com - S40 License Plate Bulb Replacement

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › S40 License Plate Bulb Replacement

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

S40 License Plate Bulb Replacement (Read 60 times)

paulchristi YaBB Newbies 2005 No Login Offline My other bike is a surfboard Posts: 41 Tucson, Arizona Gender:	S40 License Plate Bulb Replacement 10/01/10 at 14:37:25 Mine burned out....looking at the plastic cover, I realized that when I start randomly prying and poking with my screwdriver I tend to start breaking stuff. Could anyone give me a tip on how to replace this bulb? Thanks! Paul Christiansen
Back to top	IP Logged

youzguyz

Serious Thumper

Offline

Posts: 2527
San Antonio, Texas
Gender: male

Re: S40 License Plate Bulb Replacement
Reply #1 - 10/01/10 at 15:08:21

Look on the back of the light, on the other side of the license plate bracket. 2 small nuts come off, then the entire bulb assy falls apart off the front. Be careful that you see how it came apart.
Hold the plastic cover in place as you take the nuts off, then you can pull just that cover off while leaving the rest in place... maybe.
A good idea would be to see a parts breakdown before you start.
Lots of parts fiches on the internet.
I.E.
http://www.bikebandit.com/2002-suzuki-motorcycle-ls650pk2-savage/o/m6326
Look at the "Rear Combination Light" diagram

2002 - Silver (Thumper)
2000 - Green (Mad Hamish)
Most motorcycle problems are caused by the nut between the seat and the handlebars. Make sure yours isn't too tight or too loose.

IP Logged

paulchristi YaBB Newbies 2005 No Login Offline My other bike is a surfboard Posts: 41 Tucson, Arizona Gender:	Re: S40 License Plate Bulb Replacement Reply #2 - 10/01/10 at 15:29:04 thanks, youz! This is exactly what I was looking for. I would have wreaked havoc with the screwdriver.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home