Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Fixing Intake leak
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
Fixing Intake leak (Read 164 times)
DrunkenDwarf
Senior Member
Offline
Morning Zombie
Posts: 325
Seattle, WA
Gender:
Fixing Intake leak
09/10/10 at 10:44:51
Is that as simple as replacing the o-ring between the intake pipe and the cylinder head?
Anything special about that o-ring?
-D. Dwarf
Back to top
Pearl White 2007 S40; Dyna exhaust; Current jets: 52.5 w/ bleed (2 turns out) / 1.5mm (0.06") spacer / 150; raptor petcock
IP Logged
Serowbot
YaBB Moderator
ModSquad
Offline
OK.... so what's the
speed of dark?
Posts: 28660
Tucson Az
Gender:
Re: Fixing Intake leak
Reply #1 -
09/10/10 at 10:52:35
It is, if that's the part that's leaking...
Mfg. Part Number: 09280-46002 $6.66
http://www.ronayers.com/Search/N/687/PartNumber/09280-46002/Source/SU
Back to top
Ludicrous Speed !... ...
...
IP Logged
LANCER
Serious Thumper
Alliance Member
Offline
Savage Beast
Performance Parts
Posts: 10666
Oklahoma
Gender:
Re: Fixing Intake leak
Reply #2 -
09/11/10 at 08:35:26
being sure the screws/bolts are down nice and snug to prevent leaking
but not too much less it distorts the flange and causes an air leak
its not a big deal the flanges can take a good bit of abuse
it takes a heavy hand to distort them to the point of leaking but I have seen a couple that were sadly abused
so just a caution ....
Back to top
IP Logged
Tiefighterpilot
Senior Member
Offline
Daily Rider
Posts: 346
San Francisco
Re: Fixing Intake leak
Reply #3 -
09/11/10 at 17:54:09
anyone have diagram of where this o ring is?
Back to top
2007 S40, KN Cone Air Filter, BCB Pipe, BCB Fender and seat, Superbrace Fork Brace with guard, 55 Pilot, 155 Main, washer mod, iridium spark plug, no afterfire, some engine breaking noise
IP Logged
DrunkenDwarf
Senior Member
Offline
Morning Zombie
Posts: 325
Seattle, WA
Gender:
Re: Fixing Intake leak
Reply #4 -
09/11/10 at 21:27:51
Ron Ayers Fiche
-D. Dwarf
Back to top
Pearl White 2007 S40; Dyna exhaust; Current jets: 52.5 w/ bleed (2 turns out) / 1.5mm (0.06") spacer / 150; raptor petcock
IP Logged
Tiefighterpilot
Senior Member
Offline
Daily Rider
Posts: 346
San Francisco
Re: Fixing Intake leak
Reply #5 -
09/12/10 at 17:39:34
oh this is the o ring for the exhaust header... I got confused because intake was mentioned. I didn't remember seeing an intake o ring.
Back to top
2007 S40, KN Cone Air Filter, BCB Pipe, BCB Fender and seat, Superbrace Fork Brace with guard, 55 Pilot, 155 Main, washer mod, iridium spark plug, no afterfire, some engine breaking noise
IP Logged
DrunkenDwarf
Senior Member
Offline
Morning Zombie
Posts: 325
Seattle, WA
Gender:
Re: Fixing Intake leak
Reply #6 -
09/12/10 at 20:54:37
This is for the intake. There is an o-ring (part 46) between intake pipe (part 45) and the cylinder head (part 1).
-D. Dwarf
Back to top
Pearl White 2007 S40; Dyna exhaust; Current jets: 52.5 w/ bleed (2 turns out) / 1.5mm (0.06") spacer / 150; raptor petcock
IP Logged
Tiefighterpilot
Senior Member
Offline
Daily Rider
Posts: 346
San Francisco
Re: Fixing Intake leak
Reply #7 -
09/12/10 at 21:05:19
Oh, I see it.
Back to top
2007 S40, KN Cone Air Filter, BCB Pipe, BCB Fender and seat, Superbrace Fork Brace with guard, 55 Pilot, 155 Main, washer mod, iridium spark plug, no afterfire, some engine breaking noise
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/28/24 at 20:28:09
›
General Category
›
Rubber Side Down!
› Fixing Intake leak
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.