SuzukiSavage.com - minimizing backfire issues

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › minimizing backfire issues

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

minimizing backfire issues (Read 98 times)

jspace YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 48	minimizing backfire issues 08/18/10 at 21:04:21 i know i probably can't stop the backfire, but anyone have any ideas on minimizing it? my bikes complete stock so i've never messed with the carb. i don't mind the small little bumps (like when turning off the engine). usually get the big ones when i'm going down hill at speed and close the throttle to decelerate i get the big kerpow.
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: minimizing backfire issues Reply #1 - 08/18/10 at 21:45:14 start with a carb clean. then check the header bolts and muf clamp. there's a few mod's to use if those don't work.
Back to top	Versey's Place Tech Section Index IP Logged

Routy Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2280 Winston Oregon Gender:	Re: minimizing backfire issues Reply #2 - 08/19/10 at 05:02:42 Mite want to check this thread. But IMO, you're going to live w/ it. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1276816833
Back to top	Rich '07 S40 Blvd stocker, except drilled OEM exhaust and white spacer mod...1/2 (.055) IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home