SuzukiSavage.com - engine specs!! need fast!!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › engine specs!! need fast!!

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

engine specs!! need fast!! (Read 76 times)

fexterz11

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 21

engine specs!! need fast!!
06/30/10 at 15:38:22

Hello guys, i bought the top end and cylinder and i am almost done with the rebuild process but i need to know some very important specs.

1) what is the clearance of the camshaft with the plastic (i dont want to torque it to much)
2) what is the torque in the head bolts
3) ~~[s]what are the clearances on the valve adjustments on valves. (intake and exhaust)~~ [/s]

i need this by tonight! if anyone know them please call me at 909-767-6905 and leave me a message if i dont pick up or simply reply through the board..

thanks!! Cheesy

IP Logged

fexterz11 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 21	Re: engine specs!! need fast!! Reply #1 - 06/30/10 at 16:14:12 found the valve clearance which are a 0.008 to 0.013mm (.003 - .005 in inches)
Back to top	IP Logged

james may Senior Member Offline SuzukiSavage.com Rocks! Posts: 252 holyoke, ma Gender:	Re: engine specs!! need fast!! Reply #2 - 06/30/10 at 16:48:10 4 x 9mm nuts on the top of the cylinder head are 21-24ft-lbs 2x 8mm nuts on front and back on cylinder are 16-19ft-lbs according to the clymer manual.
Back to top	Weightloss Blog http://atomsweightlosschronicles.blogspot.com IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28653 Tucson Az Gender:	Re: engine specs!! need fast!! Reply #3 - 06/30/10 at 17:00:57 fexterz11 wrote on 06/30/10 at 16:14:12: found the valve clearance which are a 0.008 to 0.013mm (.003 - .005 in inches) Clymers millimeter conversion is wrong.... should be... 0.076 - 0.127mm (.003 - .005 in inches)
Back to top	Ludicrous Speed !... ... ... IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: engine specs!! need fast!! Reply #4 - 06/30/10 at 17:08:58 cam clearance... http://suzukisavage.com/cgi-bin/YaBB.pl?num=1268452150
Back to top	Versey's Place Tech Section Index IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home