SuzukiSavage.com - Exhaust sound

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Exhaust sound

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Exhaust sound (Read 351 times)

bill67 Serious Thumper Offline old tired Posts: 8517 genoa city wisconsin Gender:	Re: Exhaust sound Reply #15 - 05/12/10 at 05:45:58 Can someone put that sound on here?
Back to top	william h krumpen IP Logged

Routy Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2280 Winston Oregon Gender:	Re: Exhaust sound Reply #16 - 05/12/10 at 06:04:46 I can do a lot of things, but a sound file is not one of them. I did buy a cheap "wannabe Flip" vid camera for U-tube a month ago, and I ain't figured that out yet.
Back to top	Rich '07 S40 Blvd stocker, except drilled OEM exhaust and white spacer mod...1/2 (.055) IP Logged

bill67 Serious Thumper Offline old tired Posts: 8517 genoa city wisconsin Gender:	Re: Exhaust sound Reply #17 - 05/12/10 at 06:13:41 I have a 1/2 inch hole drilled in the center of mine up in there about 14 inches Its louder but doesn't really sound to good.It raised my power band up I guess about 300 rpm.There is to plates in there I only went through the first plate.
Back to top	william h krumpen IP Logged

Routy Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2280 Winston Oregon Gender:	Re: Exhaust sound Reply #18 - 05/12/10 at 20:49:35 What did you use a 16" drill bit ? Wow ! Kinda hard to plug that hole if you don't like it
Back to top	Rich '07 S40 Blvd stocker, except drilled OEM exhaust and white spacer mod...1/2 (.055) IP Logged

Tiefighterpilot Senior Member Offline Daily Rider Posts: 346 San Francisco	Re: Exhaust sound Reply #19 - 05/12/10 at 22:07:18 I just did the mod suggested by Routy. Sounds good. I will be installing a HD sportster muffler, cone filter and rejetting soon (parts and tools are starting to arrive). I will put up a log of my install/or mess.
Back to top	2007 S40, KN Cone Air Filter, BCB Pipe, BCB Fender and seat, Superbrace Fork Brace with guard, 55 Pilot, 155 Main, washer mod, iridium spark plug, no afterfire, some engine breaking noise IP Logged

bill67

Serious Thumper

Offline

old tired

Posts: 8517
genoa city wisconsin
Gender: male

Re: Exhaust sound
Reply #20 - 05/13/10 at 03:15:43

Routy wrote on 05/12/10 at 20:49:35:

What did you use a 16" drill bit ? Wow ! Kinda hard to plug that hole if you don't like it Shocked

I figured I could take like a quarter or electrical knot out,super glue it on a 1/2 inch wood dowel,then put liquid weld on the other end push in there tap with a hammer let set over night the twist of the wood dowel,I used a extension with a bit on the end to drill the hole in it.I have drilled a lot of mufflers like this Suzukis don't get to loud,Honda's get pretty loud doing it.

william h krumpen

IP Logged

onelunger

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 38

Re: Exhaust sound
Reply #21 - 05/13/10 at 04:29:47

Here's another off the wall suggestion. Take the plastic side cover off of the airbox. I know it sounds silly but it will let out a pretty good amount of induction noise. This gives the bike a much deeper roar under acceleration and will cost next to nothing. I say next to nothing because it will most likely require a jetting change. Just grab a bigger main jet (their about $6 locally-the guys on here should be able to point you to a size that's close to right) and do the "white spacer mod" as well as the baffle mods to the muffler others have told you about and your Savage will sound like a whole different animal. Total cost will most likely not exceed $20.

IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home