matt
Full Member
Offline
da na na na na mattman
Posts: 228
Winter Springs, FL
Gender:
|
THX Serowbot!
======================
Im wondering what it means when, right before she dies i pull the vacuum line and shes alive again.
I try to let her idle for a few to warm her up before i go, recently she starts up ok, rpm slows down to finally she cuts out. I have increased the idle a few times to keep it alive at least to go but eventually it will cut out.
When it is expiriencing this sometimes i give it a little gas and few of the times it was a little rough. almost like its running out of gas kinda putters.
This condition seems to be hit or miss, although its seemingly more frequent, which is now every morning..
It seems to run fine highway, although today when it was decelerating it farted all the way through.
So when i got home first thing i checked was the vaccuum line, and it was loose at the tank end, so i fixed it and started it, no change. So when the idle started slowing before it died i pulled the line off the carb then rpms picked up and started idling just fine again.
I changed my plug on the weekend and it looked like it was a little rich, i havent checked the plug today yet. Also took carb off clean it out none of jets looked clogged
So im not sure where to start and was wondering if anyone had any ideas
|