SuzukiSavage.com - Ing Switch wiring help. Yea it started!!!

metricman

YaBB Newbies

Offline

Be your own man

Posts: 16

Ing Switch wiring help. Yea it started!!!
03/09/10 at 13:15:24

Here is a picture of the rigged starter switch, it has 4 terminals
the start terminal in the middle has no wire connected to it.
orange wire connected to ing.
the red w/white wire is connected to acc
the two brown and gray are connected to batt.
I am getting no power to the starter, all the light work I also have pwr at the coil. My? is what wires can i us to bypass the switch and hot wire the bike.
and what is the correct order for the wires on the ing switch.
Thanks for your help in advance, I guess my next step should be to by a manual for the bike.

Back to top

« Last Edit: 03/11/10 at 13:50:20 by metricman »

A biker shouldn’t be defined by the motorcycle he/she rides, but by the passion they have for it.
A word to the wise ain't necessary - it's the stupid ones that need the advice..lol

IP Logged

serenity3743 Serious Thumper Offline Striving to better, oft we mar what's well Posts: 778 Black Mountain, NC Gender:	Re: Ing Switch wiring help. trying to unrig the wi Reply #1 - 03/09/10 at 13:53:02 Not to insult you, but sometimes the obvious gets missed: Is the kill switch in the correct position?
Back to top	2000 LS650P Suzuki windshield, luggage rack, saddle bag racks, k & n air filter, Dyna muffler,2/3 white spacer, do-it-myself seat. Love to ride! IP Logged

thumperclone Serious Thumper Alliance Member Offline PGR rider riding with respect Posts: 6244 Grand Junction Colorado Gender:	Re: Ing Switch wiring help. trying to unrig the wi Reply #2 - 03/09/10 at 15:17:12 electrons have trouble flowing thru rust..you got a corrosion problem to start with...
Back to top	standing for those who stood for US IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28908 L.A. California Gender:	Re: Ing Switch wiring help. trying to unrig the wi Reply #3 - 03/09/10 at 16:48:49 here's bobbert's wiring diagram
Back to top	Versey's Place Tech Section Index IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28908 L.A. California Gender:	Re: Ing Switch wiring help. trying to unrig the wi Reply #4 - 03/09/10 at 16:54:09 disclaimer "I just find this stuff, I don't work here" http://www.btinternet.com/~jhpart/bkwirec.htm
Back to top	« Last Edit: 03/09/10 at 18:20:32 by verslagen1 » Versey's Place Tech Section Index IP Logged

metricman

YaBB Newbies

Offline

Be your own man

Posts: 16

Re: Ing Switch wiring help. trying to unrig the wi
Reply #5 - 03/09/10 at 19:32:06

Even in the service manual does not specify, look at my first picture again, the start terminal has no wire connected to it, if any one might know or feels like pulling there ing switch cover off and looking behind it to confirm which wire goes where, much appreciated. not my first bike but thanks for all the insight.

if any of you have a facebook acct please check out my group page metricman. http://www.facebook.com/group.php?gid=230039719565&ref=ts

Back to top

A biker shouldn’t be defined by the motorcycle he/she rides, but by the passion they have for it.
A word to the wise ain't necessary - it's the stupid ones that need the advice..lol

IP Logged

justin_o_guy2

Serious Thumper

Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.

Re: Ing Switch wiring help. trying to unrig the wi
Reply #6 - 03/09/10 at 19:39:51

Someone seriously needs to dig up my posts on how to solve this. Ive sworn to never type it again, & Im NOT. My bike will turn over w/o the key in it because of a TINY switch connecting the red wire ( 12 V) under the seat to the decomp timer. You dont need the switch except to turn the power on to the coil for my little deal to work.

Back to top

The people never give up their liberties but under some delusion.- Edmund Burke.

IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28908
L.A. California
Gender: male

Re: Ing Switch wiring help. trying to unrig the wi
Reply #7 - 03/09/10 at 19:44:13

1st, this aint the stock switch, somebody done stole it offa da ford. couldn't keep it runnin' anyway.

To hot wire it... pretty simple, take all the wires and twist them together. Don't let it touch anything lessin' you wanna lite yor @$$ on fire. The red one with a wht stripe is hot, the rest take a convoluted path to ground.

Does that thing have a connector on it? If it does, you can replace it with another stock one.

Back to top

Versey's Place
Tech Section Index

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28908 L.A. California Gender:	Re: Ing Switch wiring help. trying to unrig the wi Reply #8 - 03/09/10 at 19:51:20 The starter should work off of the button on the right grip. I know you don't got stock, but in case you do... power should come off the starter button and go thru the clutch switch to the decomp controller then on to the starter relay.
Back to top	Versey's Place Tech Section Index IP Logged

metricman

YaBB Newbies

Offline

Be your own man

Posts: 16

Re: Ing Switch wiring help. trying to unrig the wi
Reply #9 - 03/11/10 at 13:48:27

Yea it started... I feel better about my $270 investment.
But as usual it was the simplest thing holding me up!!!
all I needed to do was pull in the clutch in to start it....
my other bikes don.t require this when in neutral... haha Tongue

now it is time to get started on the retro rebuilding of the bike.
thanks for all your help guys.

Back to top

A biker shouldn’t be defined by the motorcycle he/she rides, but by the passion they have for it.
A word to the wise ain't necessary - it's the stupid ones that need the advice..lol

IP Logged