SuzukiSavage.com - Having issues after a long winter

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Having issues after a long winter

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Having issues after a long winter (Read 129 times)

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Having issues after a long winter Reply #15 - 03/09/10 at 11:28:36 Ive left screws out of things & they still work, but springs arent generally optional.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28890
L.A. California
Gender: male

Re: Having issues after a long winter
Reply #16 - 03/09/10 at 11:28:39

shermeco wrote on 03/09/10 at 08:10:25:

verslagen1 wrote on 03/09/10 at 08:07:20:

How long sitting?
Fresh gas?
whatza sparky like?
Jets, before and after?
whiskey or beer?

Whiskey and beer!!
I used the Jets lancer sells
Sat for 3 months

Ah, you'll be ok.
Add an once of seafoam to the tank
I'd find that spring and get it in there.
most likely causing uneven running.
and sounds like you need to adjust idle.
or do you know how many turns out are you?

Versey's Place
Tech Section Index

IP Logged

shermeco Junior Member Offline SuzukiSavage.com Rocks! Posts: 65	Re: Having issues after a long winter Reply #17 - 03/09/10 at 11:41:54 Not sure how many turns right at the moment been messing with it so much i need to re do all of that. Just ordered a new spring and I'm going to put a few washers in place where the white spacer used to be for good measure. I dont know where i read to just take the spacer out all together and put nothing in its place
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28890 L.A. California Gender:	Re: Having issues after a long winter Reply #18 - 03/09/10 at 11:43:21 The stock washer is 0.110" thick. In your case, leaving it out will make it worse.
Back to top	Versey's Place Tech Section Index IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home