Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1 2 3 4 
Send Topic Print
On Quick Deceleration Tire or Belt Barks (Read 500 times)
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28884
L.A. California
Gender: male
Re: On Quick Deceleration Tire or Belt Barks
Reply #15 - 12/26/09 at 13:10:25
 
Loosening makes the bike go forward.
Tightening makes it go backward.
Back to top
 
 
WWW   IP Logged
BurnPgh
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 1732

Re: On Quick Deceleration Tire or Belt Barks
Reply #16 - 12/26/09 at 13:18:37
 
righty tighty for sure unless they've changed anything from 95 to now. Get a buddy to hit the rear brake or get a good strong broomstick. You'll definately need an impact wrench.
Back to top
 
 
  IP Logged
Boule’tard
Serious Thumper
ModSquad
*****
Offline

Master of the
Obvious

Posts: 1620
Austin TX
Gender: male
Re: On Quick Deceleration Tire or Belt Barks
Reply #17 - 12/26/09 at 19:04:25
 
Serowbot and BurnPgh are correct according to the manual.. the threads are just standard righty tighty/lefty loosey.. and a "nut lock washer" you have to unlock.  There's nothing in there about the broomstick method to hold the pulley though.. just the brake.  That and the impact wrench should spin it off in no time.

Retightening torque is 72.5-94 ft*lbs.
Back to top
 
 

That which can be destroyed by the truth should be. - P.C. Hodgell
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28884
L.A. California
Gender: male
Re: On Quick Deceleration Tire or Belt Barks
Reply #18 - 12/26/09 at 21:46:49
 
The broom stick should be a last ditch resort.
As you could shear off some spokes.
Back to top
 
 
WWW   IP Logged
justin_o_guy2
Serious Thumper
*****
Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.
Re: On Quick Deceleration Tire or Belt Barks
Reply #19 - 12/26/09 at 22:40:45
 
Its pretty hard to roll the bike over a 4X4. Ill bet with one up against the rear tire with someone on the brake hard, no broomstick would be needed. Especially if a guy had an impact.
Back to top
 
 

The people never give up their liberties but under some delusion.- Edmund Burke.
  IP Logged
BurnPgh
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 1732

Re: On Quick Deceleration Tire or Belt Barks
Reply #20 - 12/27/09 at 04:01:51
 
verslagen1 wrote on 12/26/09 at 21:46:49:
The broom stick should be a last ditch resort.
As you could shear off some spokes.


Good call. I keep forgetting most people here still have spokes  Grin
Back to top
 
 
  IP Logged
serenity3743
Serious Thumper
*****
Offline

Striving to better,
oft we mar what's
well

Posts: 778
Black Mountain, NC
Gender: male
Re: On Quick Deceleration Tire or Belt Barks
Reply #21 - 01/04/10 at 10:22:11
 
BurnPgh wrote on 12/27/09 at 04:01:51:
verslagen1 wrote on 12/26/09 at 21:46:49:
The broom stick should be a last ditch resort.
As you could shear off some spokes.


Good call. I keep forgetting most people here still have spokes  Grin


It's not just the wheel spokes you have to worry about.  It's also the spokes on the rear belt pulley, and I did break one when trying to either tighten or loosen the front belt pulley.  But if you have a chain, I guess that would be different too.
Back to top
 
 

2000 LS650P Suzuki windshield, luggage rack, saddle bag racks, k & n air filter, Dyna muffler,2/3 white spacer, do-it-myself seat. Love to ride!
  IP Logged
Ebikerman
Full Member
***
Offline

Jesus is #1

Posts: 100
Fitzgerald, GA
Gender: male
Re: On Quick Deceleration Tire/Belt Barks SOLVED
Reply #22 - 01/04/10 at 10:47:17
 
Thanks All for your interest & advice. Turns out the problem was fixed by a simple tighting of the belt.....Dan
Back to top
 
 

2006 S40. Christian biker. Bikes rock, but there is more to life than bikes.
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28884
L.A. California
Gender: male
Re: On Quick Deceleration Tire/Belt Barks SOLVED
Reply #23 - 01/04/10 at 13:53:04
 
Ebikerman wrote on 01/04/10 at 10:47:17:
Thanks All for your interest & advice. Turns out the problem was fixed by a simple tighting of the belt.....Dan

I acquired a drive pulley with worn out teeth.  Not that I intend to do anything with it, just a warning.  Did you tighten the Drive Pulley Nut?

And what tension did you tighten the belt too?
Back to top
 
 
WWW   IP Logged
Digger
Serious Thumper
2005 No Login
*****
Offline

Ya gotta be tough to
ride singles!

Posts: 1604
Colorado Springs, CO
Gender: male
Re: On Quick Deceleration Tire or Belt Barks
Reply #24 - 01/04/10 at 20:15:55
 
In regards to loosening the drive pulley:

It was a cinch for me because I had the bike snugged down on my lift.  No way was it going to roll forward as I broke that pulley nut loose!


Back to top
 
 

Digger
2001, Metallic Glacial Blue, Raptor Petcock, Verslavy (first hole) (otherwise, mechanically, the bike is stock), 13,xxx miles
I don't own a cage.
www.astronautbiker.com
WWW   IP Logged
BurnPgh
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 1732

Re: On Quick Deceleration Tire or Belt Barks
Reply #25 - 01/04/10 at 23:05:45
 
nice lift. looks pricey. Im kind of sick of the bottle jack and 2x4s/milk crate
Back to top
 
 
  IP Logged
Ebikerman
Full Member
***
Offline

Jesus is #1

Posts: 100
Fitzgerald, GA
Gender: male
Re: On Quick Deceleration Tire or Belt Barks
Reply #26 - 01/05/10 at 09:10:38
 
My belt tension was really too loose. It had untensioned slack on the bottom run. I used the tensioner that came in the tool kit. I know many of you do not like it. However it should give repeatable readings. I only had to tighten a little to get the excess slack out. I had it pretty loose before. It is not overly tight now. The twist method is not very accurate and not repeatable. Too subjective for the final adjustment. I did not tighten the drive pulley. It did not seem necessary since it has a lock washer and tightening the belt stopped the noise. My belt was so loose that I believe it sort of wadded up in the front pulley on deceleration, thus scrubing the sides of the pulley. If I am wrong, let me know...Dan
Back to top
 
 

2006 S40. Christian biker. Bikes rock, but there is more to life than bikes.
  IP Logged
justin_o_guy2
Serious Thumper
*****
Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.
Re: On Quick Deceleration Tire or Belt Barks
Reply #27 - 01/05/10 at 09:13:35
 
It may have been slopping out & hitting the case ib front of the drive pulley. Not much room in there.
Back to top
 
 

The people never give up their liberties but under some delusion.- Edmund Burke.
  IP Logged
Ebikerman
Full Member
***
Offline

Jesus is #1

Posts: 100
Fitzgerald, GA
Gender: male
Re: On Quick Deceleration Tire or Belt Barks
Reply #28 - 01/05/10 at 09:15:13
 
Digger, Where did you get that cool lift? I want one. It is not so bulky as some. Please direct me to where I can purchase one. About what does it cost too? Thanks, Dan
Back to top
 
 

2006 S40. Christian biker. Bikes rock, but there is more to life than bikes.
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28884
L.A. California
Gender: male
Re: On Quick Deceleration Tire or Belt Barks
Reply #29 - 01/05/10 at 09:21:02
 
Hey Dan, whatever works for you  Smiley

I questioned your input only to have better understanding of your fix.

I recently had the belt guards off and noted how loose the belt seems.
But I've had none of the issues you've stated.
Back to top
 
 
WWW   IP Logged
Pages: 1 2 3 4 
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
09/22/24 at 22:30:11



General CategoryRubber Side Down! › On Quick Deceleration Tire or Belt Barks


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.