Diamond Jim- I think I'm going to keep using my HD fishtail. It's not the perfect looking pipe but it's still got edge and it sounds amazing. "Chopper" describes both the way my bike looks and sounds!
UPDATE 2/7/10
I'm wiring up the electrics at the moment. I cut out plates to mount the components. Here's the plate with the starter relay and the fuse panel.
Back side starter relay
Front side fuse panel
Here are the two plates I made mounted to the frame. The plate underneath the seat is gonna hold the ignitor box.
The ignitor box in position on the top plate.
Routing of the wires (in cloth sheath) towards the front of the bike.
The supply to the front of the bike goes to the spark plug (top sheath) and the starter button (bottom sheath)
Hooking it up to test the lights. The yellow/white wire hanging over the rail there comes from the starter button and is going to be plugged into the relay once I've got everything in place.
Battery is going to go in a box behind the engine and under the swingarm.
The electric system here basically works. I'm getting power to the head and tail lights, starter button, ignitor box, and coil. My starter, ignitior box, and battery are working (tested them in Verslagen's savage) but I'm not getting enough juice through my starter. Likely a combination of the main cables being too small to carry the current and having too much resistance in the engine from not being properly lubed yet.