SuzukiSavage.com - cam ? ?

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › cam ? ?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

cam ? ? (Read 79 times)

tfrawg75 Junior Member 2005 No Login Offline that's right I do rock Posts: 92 Gender:	cam ? ? 07/23/09 at 14:04:55 I have my motor apart to do cam chain and fix oil leaks on cylinder. My question is I've got motor on TDC what position should I put cam in? Do i line up marks on cam with head like is says in clymer's ? Or is there a better way?
Back to top	IP Logged

Yonuh Adisi FSO Serious Thumper Offline Savage Jedi (Knight) Posts: 3622 Pilot Valley NV, aka Tatooine Gender:	Re: cam ? ? Reply #1 - 07/23/09 at 14:43:31 Yes, line up the cam marks like the Clymers says.
Back to top	Check out Flight of Destiny http://www.amazon.com/dp/B00H9130XC IP Logged

tfrawg75 Junior Member 2005 No Login Offline that's right I do rock Posts: 92 Gender:	Re: cam ? ? Reply #2 - 07/23/09 at 14:46:41 alrite thanks . Just want to be sure . That clymer's is a little screwy on some things. lol Thanks again
Back to top	IP Logged

Stimpy - FSO Serious Thumper Offline SuzukisSavage Int'l Division Posts: 1203 Germany - formerly SD, SoCal Gender:	Re: cam ? ? Reply #3 - 07/23/09 at 15:53:25 yup, marks lined up AND writing on top chain sprocket goes on top
Back to top	Recently sold 97'savage (change of residence) - looking to buy another - just bought a temp, a great SR125 called 'methadone' IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: cam ? ? Reply #4 - 07/23/09 at 16:39:04 With cam chain on the forward side taunt, the marks on the cam shaft should be horizontal and the pin at 1 o'clock. If not perfectly horizontal they should be up on the taunt side.
Back to top	Versey's Place Tech Section Index IP Logged

tfrawg75 Junior Member 2005 No Login Offline that's right I do rock Posts: 92 Gender:	Re: cam ? ? Reply #5 - 07/23/09 at 16:53:23 not sure where the pin was but it fired up this time so that is better than the first time I put it together guess it moved from TDC I'm takin break now before puttin it all back together.
Back to top	IP Logged

tomtaz1975 YaBB Newbies Offline Let's Ride! Posts: 34 Milwaukee, WI Gender:	Re: cam ? ? Reply #6 - 07/23/09 at 17:18:43 I haven't done it yet, (cam chain on the way!!!), but I am also planning on using this video and instruction guide as a reference... http://www.youtube.com/watch?v=nQMFq5jGTWw http://ls650.info/ValveAdjustment
Back to top	2001, Yellow, Dunstall Megaphone Long, 155 Main, 55 Pilot, no spacer, K&N Filter. IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home