srinath
Serious Thumper
Offline
I love YaBB 1G - SP1!
Posts: 5349
|
Oooo Mike strikes made these delrin bits for the tank. You can extend that hole to be a slot. Then you can put in some sorta handle/screw/tag in it so you can pull it out with the tank still on the bike. That will leave you plenty of shake/wobble room to pill the tank. Also mike can be persuaded to make some - but make with rounder corners and machine them smoother, so they slide easier. I dunni, there could be a ear machined into it - if he can do that, so you can get it out when the tank is still in it. Somehting like a ear on the back side as it sits n the bike and the ear should be in the rear part of it. You put it in with the open end facing forward and spin it so the tank cane come out by itself. Then spin it back and pull it off. Somehting like that. It should have a couple flat spots top and bottom, and a tab on the back side. Yea ... K confused enough ... OK fine. I'll send a pic to mike strikes. Cool. Srinath.
|