SuzukiSavage.com - seat lift mod with single piece seat

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › seat lift mod with single piece seat

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

seat lift mod with single piece seat (Read 110 times)

DrunkenDwarf Senior Member Offline Morning Zombie Posts: 325 Seattle, WA Gender:	seat lift mod with single piece seat 06/03/09 at 08:30:39 Anyone done the seat lift mod with the newer single piece seat? If so, any additional pitfalls? -D. Dwarf
Back to top	Pearl White 2007 S40; Dyna exhaust; Current jets: 52.5 w/ bleed (2 turns out) / 1.5mm (0.06") spacer / 150; raptor petcock IP Logged

odvelasc

Ex Member

Re: seat lift mod with single piece seat
Reply #1 - 06/03/09 at 10:12:05

DrunkenDwarf wrote on 06/03/09 at 08:30:39:

Anyone done the seat lift mod with the newer single piece seat?

If so, any additional pitfalls?

-D. Dwarf

It will be fine. Its no different. If you have the S40 than you will have no issues remoutning th seat. If like me, you have the savage with a 2 piece, than its a bit of a squezze toget the seat under the backrest, but its do-able.

IP Logged

John_D FSO

Serious Thumper

Offline

Ridin' and smilin'

Posts: 1658
Vancouver, WA
Gender: male

Re: seat lift mod with single piece seat
Reply #2 - 06/03/09 at 15:15:44

DrunkenDwarf wrote on 06/03/09 at 08:30:39:

Anyone done the seat lift mod with the newer single piece seat?

If so, any additional pitfalls?

-D. Dwarf

Here's a link to the pics of my mod. It didn't quite raise it enough for me, so I just put the tab on the front of the seat on top of the hold-down plate for now, and that put it up enough extra to be comfy. Of course that way I definitely had to make sure and get the two bolts on the side good and snug, because they're all that keep the seat from pivoting side to side now. Grin

I took some measurement, and am going to dig through the scrap bin at work this weekend and see if I can come up with something taller and better looking. Modding is a slippery slope indeed! Cheesy

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1239074042/0#0

'07 ElectraGlide.

IP Logged

TheCaliKid YaBB Newbies Offline Posts: 31 Hollywood, CA	Re: seat lift mod with single piece seat Reply #3 - 06/03/09 at 15:46:34 Great mod, did it on my 07. I added some hard rubber on the frame tubes near front (over existing ones) to keep it rigid.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home