Tkat
YaBB Newbies
Offline
I love YaBB 1G - SP1!
Posts: 15
Gender: 
|
First, my apologies for not posting this in the Market Place but while it is a “product” it isn’t meant to be. I only do them to help the Group.
The latest batch of F/Bs is complete & ready for shipping. Unfortunately, it was a very low yield. As previously mentioned, I’ve installed new vices on my mill and am now “coming to terms” w/ them. In the learning curve, 2 sets ended up a tad short in the fender clearance area.
As I don’t have a bike here to trial fit I can’t guaranty that they will clear the top of the fender. The clearance between the top of the slider and the bottom of the X-bar is 0.240”. The regular F/B measures 0.375” - a difference of a tick over 0.125”. Rather than scrap them, I’ll cut $10 off the price of these 2 sets. If interested, lay a straight edge across the top of the sliders and see if there’s a 1/4” between it and the top of the fender. If so, yer in business.
The first 2 people to respond via direct e-mail get ‘em - tkat@tkat.com.
Other than those, All the rest went to people on the waiting list. But yes, in all fairness, there will be another run @ the present price. The material is in house and just waiting for a break to get whittled on.
As before, I’ll post when ready.
Tkat
Here are some new golf terms to add to your vocabulary.
*Paris Hilton* - a very expensive hole.
*Rock Hudson * -it looked straight, but wasn't.
*Saddam Hussein* - from one bunker into another.
*Yasser Arafat* - butt ugly and in the sand.
*Princess Grace* - should have used a driver.
*Princess Di* - shouldn't have used a driver.
|
Pages: 1
