oksavage wrote on 12/16/08 at 13:50:01:will 4" risers that say they are for a Harley Sportster 1" bar fit on the Savage with no modification. They are the two separate piece design. Tons of them on Ebay.
4 inch harley risers that are separate pieces will fit with removal of the sleeve in the top triple donuts. They use 1/2 inch bolt, savage uses a 10mm with sleeve that is 12mm dia.
The bars of course you fit to your liking. The problem starts to get more acute when you get taller than that 4 inch. Wiggling and wobbling starts to increase as you get taller and/or wider.
Past that 4 inch height you'd start to need 1 piece top plates, then past 8 in you need delrin donuts etc ... but short and narrow is better ... almost anything will work.
BTW I can make the bar with SS to your specs. $1 per inch width. Broomstick, 10 deg bends ... 15 degree bends ... more ... no problem.
27-28 is as narrow as you can get to fit, and up to 36+ should work well. Heck even 40 will.
Cool.
Srinath.