Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Head plug leak fixed???
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
Head plug leak fixed??? (Read 10 times)
SteveRocket1
Senior Member
Offline
A day without riding
is like a day
without beer.
Posts: 441
California
Gender:
Head plug leak fixed???
10/01/07 at 13:41:55
I took on the dreaded head plug this weekend. Took it to my friends house to work on it in his garage. Got it all stripped done and followed Savage Greg's tech doc (Thanks Greg). Head plug just more or less fell out of the hole so we cleaned it all up and I put some sealer around the new one put it back it and reassembled it. Took it home, next morning I washed off the engine at the carwash across the road and found out it was still leaking oil from somewhere. Took it back to friends house and we stripped it down again. I think the problem was the odd shaped O ring that seal one of the oil ways did not have the same shape as the replacement one I bought so I left the old one on there. This time we changed it and bolted it back up. We had a slight problem when my friend tighted down the very front head right hand side cover bolt it stripped the thread not on the bolt but what it bolts into either the head or the engine case I am not sure.
Being as this is my transport to work I said just finish putting it back together and if it leaks I will fix it next time. Now has this happened to others ? . If so did you heli coil it or strip it right back down and retap the bolt hole. I checked it today after about 50 miles and it does not seem to be leaking oil anywhere. So I will probably leave it till it does. Any thoughts on what I should do ?
Back to top
'87 Savage but now with a Supertrapp muffler with 8 disks and competition end cap, TKat Fork brace, oldfeller airfilter, Z Bars, Turn Signal bleeper,Rather Loud Horn. and cousin Bonnie too..
IP Logged
Savage_Greg
Serious Thumper
Alliance Member
Offline
Don't go around your
ass to reach your
elbow...
Posts: 7844
SW Washington State
Gender:
Re: Head plug leak fixed???
Reply #1 -
10/01/07 at 13:56:18
You are welcome.
You stripped the bolt hole for the chrome cover on the right side of the headcover? That won't cause any trouble since some people remove those covers anyway.
As for that little egg shaped o-ring, I use a little vaseline on things like that to hold them in place during assembly. I keep a little jar in the garage. Of course, you could use a wheel bearing grease, but it just seems neater
Back to top
IP Logged
SteveRocket1
Senior Member
Offline
A day without riding
is like a day
without beer.
Posts: 441
California
Gender:
Re: Head plug leak fixed???
Reply #2 -
10/01/07 at 13:58:51
no it was the one that goes throught the cover down into the head , I think or even righ through to the casing
Back to top
'87 Savage but now with a Supertrapp muffler with 8 disks and competition end cap, TKat Fork brace, oldfeller airfilter, Z Bars, Turn Signal bleeper,Rather Loud Horn. and cousin Bonnie too..
IP Logged
SteveRocket1
Senior Member
Offline
A day without riding
is like a day
without beer.
Posts: 441
California
Gender:
Re: Head plug leak fixed???
Reply #3 -
10/01/07 at 14:00:41
also when I took off the head cover the egg shaped o ring that was in there was almost like a figure of 8 not the like the one I replaced it with at all
Steve
Back to top
'87 Savage but now with a Supertrapp muffler with 8 disks and competition end cap, TKat Fork brace, oldfeller airfilter, Z Bars, Turn Signal bleeper,Rather Loud Horn. and cousin Bonnie too..
IP Logged
Savage_Greg
Serious Thumper
Alliance Member
Offline
Don't go around your
ass to reach your
elbow...
Posts: 7844
SW Washington State
Gender:
Re: Head plug leak fixed???
Reply #4 -
10/01/07 at 14:08:39
Well, I suppose that you'll just have to wait and see if it leaks. That isn't one that's involved with holding the cam shaft...either that, or it will be another good winter project to fix the threads.
I've had this discussion before. The o-ring is supposed to be funny shaped but not really a figure 8. More like egg or oval shaped.
Back to top
IP Logged
Demin
Serious Thumper
Offline
We need more
chlorine in the gene
pool
Posts: 2435
Warren,Ohio
Gender:
Re: Head plug leak fixed???
Reply #5 -
10/01/07 at 14:33:55
If it aint leakin' I'd leave it alone.
.Me on the other hand stripped the right rear one that goes into the cylinder,through an oil passage.Guess what I had to do?
...that's right whole top end came off to do one heli-coil.Because there wasn't room to drill it out straight while on the bike.
I hate Murphy and his stupid laws.
Back to top
Next project:finish '87 Savage custom/bobber/CHOP STYLE***DONE
finish '77 Yamaha XS650 bobber Bought another one
finish'79 Harley custom bobber(NEXT)
IP Logged
Savage_Greg
Serious Thumper
Alliance Member
Offline
Don't go around your
ass to reach your
elbow...
Posts: 7844
SW Washington State
Gender:
Re: Head plug leak fixed???
Reply #6 -
10/01/07 at 15:13:38
Demin wrote
on 12/31/69 at 16:00:10:
If it aint leakin' I'd leave it alone.
.Me on the other hand stripped the right rear one that goes into the cylinder,through an oil passage.Guess what I had to do?
...that's right whole top end came off to do one heli-coil.Because there wasn't room to drill it out straight while on the bike.
I hate Murphy and his stupid laws.
That was your punishment for breaking the law...
Back to top
IP Logged
SteveRocket1
Senior Member
Offline
A day without riding
is like a day
without beer.
Posts: 441
California
Gender:
Re: Head plug leak fixed???
Reply #7 -
10/01/07 at 15:24:19
I will have to do it one weekend I suppose I live in California so I don't have winter. (thankfully). It cant leak much worse than the plug I suppose. It does make me think a Lancer camshaft would be a good idea. cause if I have it down that far I might as well, and of course it will need a carb to match it and my supertrapp lol. Then with a bit of tuning it becomes a "Super Savage" . I like that idea.
Steve
Back to top
'87 Savage but now with a Supertrapp muffler with 8 disks and competition end cap, TKat Fork brace, oldfeller airfilter, Z Bars, Turn Signal bleeper,Rather Loud Horn. and cousin Bonnie too..
IP Logged
SteveRocket1
Senior Member
Offline
A day without riding
is like a day
without beer.
Posts: 441
California
Gender:
Re: Head plug leak fixed???
Reply #8 -
10/03/07 at 11:02:52
So far so good. No leaks. The other thing I looked at a bit more was the stripped bolt. It looks to go right through the head so I could feasably put a slight longer bolt in to catch the good threads or put a thinner bolt with a nut on the end
we shall see
Steve
Back to top
'87 Savage but now with a Supertrapp muffler with 8 disks and competition end cap, TKat Fork brace, oldfeller airfilter, Z Bars, Turn Signal bleeper,Rather Loud Horn. and cousin Bonnie too..
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/23/24 at 05:18:28
›
General Category
›
Rubber Side Down!
› Head plug leak fixed???
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.