SuzukiSavage.com - clutch hub nut

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › clutch hub nut

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

clutch hub nut (Read 6 times)

rigidchop Serious Thumper Offline don't feed the drama llama Posts: 1105 ravenswood wv Gender:	clutch hub nut 08/17/07 at 07:40:46 what is the size of the clutch hub nut, don't want to buy tools i don't need. it's the only thing holding me back from my cam chain replacement.
Back to top	87 VM ED L IP Logged

T Mack 1 - FSO Serious Thumper Alliance Member Offline sold 2001 LS650 for a 1986 XLH1100 Posts: 2919 Emmaus,Pa Gender:	Re: clutch hub nut Reply #1 - 08/17/07 at 07:59:43 Either 32mm or 36mm. I can't remember which is clutch and which is crankshaft nut. Use a ruler to check. A 1 1/4" socket can be used in place of the 32mm as the mm to inch conversion has the 1 1/4" tiny bit smaller.
Back to top	Engineers design things, Technicians make them work. --- 30% of being mechanical is confidence/30% is knowing to go slow when needed/30% is looking repeatedly at what you have/10% is dumb luck IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: clutch hub nut Reply #2 - 08/17/07 at 08:28:28 30 or 32mm on a '96. one size is the crank, and the other the clutch. I priced the 2 sizes at sears, then went to harbor freight and bought a whole set for about the same.
Back to top	Versey's Place Tech Section Index IP Logged

T Mack 1 - FSO Serious Thumper Alliance Member Offline sold 2001 LS650 for a 1986 XLH1100 Posts: 2919 Emmaus,Pa Gender:	Re: clutch hub nut Reply #3 - 08/17/07 at 09:06:47 OOPs, I do own a 30mm socket, forgot. Got it from my VW days. Had all the sockets laid out on the bench durning the rebuild. Used what fit. Sorry.
Back to top	Engineers design things, Technicians make them work. --- 30% of being mechanical is confidence/30% is knowing to go slow when needed/30% is looking repeatedly at what you have/10% is dumb luck IP Logged

rigidchop Serious Thumper Offline don't feed the drama llama Posts: 1105 ravenswood wv Gender:	Re: clutch hub nut Reply #4 - 08/17/07 at 13:42:50 for future reference on an 87, it's 30 mm for the crank and 32 mm for the clutch. thanks for your help.
Back to top	87 VM ED L IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home