SuzukiSavage.com - main jet

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › main jet

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

main jet (Read 1 times)

jd06s40 Full Member Offline live to ride Posts: 121 marion ohio Gender:	main jet 05/02/07 at 18:52:20 main jet washers. does anyone know where i can get a few of them. i would like to have a few on hand.
Back to top	06 s40 se muffler,152.5 mainjet,55pilot,whitespacer mod,suzuki windscreen,gel seat,sissybar more to come IP Logged

Reelthing

Serious Thumper
Alliance Member

Offline

Fish or ride that is
the question

Posts: 5397
Houston,Tx
Gender: male

Re: main jet
Reply #1 - 05/02/07 at 19:07:54

bet they can be ordered - say order a few oil filters, orings (cover and stem) and what ever else looks like you'll need - say muffler gasket and headpipe gasket if you take it apart now and then clutchside case gasket - and you'll save enough over dealer prices to more than cover shipping.

yes from crotchrocket.com

WASHER 13382-03110 (replaces 13332-44080) $1.24

IP Logged

jd06s40 Full Member Offline live to ride Posts: 121 marion ohio Gender:	Re: main jet Reply #2 - 05/02/07 at 19:15:20 thanks
Back to top	06 s40 se muffler,152.5 mainjet,55pilot,whitespacer mod,suzuki windscreen,gel seat,sissybar more to come IP Logged

tuxedo Senior Member Offline medium pimpin. Posts: 275 Hot Springs, AR Gender:	Re: main jet Reply #3 - 05/02/07 at 20:16:26 anyone know what size they are? Do the 1987-88 models have those washers in their carbs?
Back to top	I like persons better than principles, and I like persons with no principles better than anything else in the world. 86 Savage IP Logged

Reelthing Serious Thumper Alliance Member Offline Fish or ride that is the question Posts: 5397 Houston,Tx Gender:	Re: main jet Reply #4 - 05/02/07 at 21:24:19 fairly thick brass - yes, all this model carb has this under the mainjet - it holds the needle jet tube in place - leave it out and brother you have rich rough running bike as soon as the tube pops up
Back to top	IP Logged

tuxedo Senior Member Offline medium pimpin. Posts: 275 Hot Springs, AR Gender:	Re: main jet Reply #5 - 05/02/07 at 21:52:52 we talking like, 3/32" thick? I ask because I am gonna buy one from my local cycle shop or at least get something as a stopgap at lowe's until stealership gets one. I've been riding my 86 with a 155 main and no little brass washer. Yeah. Riding.
Back to top	I like persons better than principles, and I like persons with no principles better than anything else in the world. 86 Savage IP Logged

Reelthing Serious Thumper Alliance Member Offline Fish or ride that is the question Posts: 5397 Houston,Tx Gender:	Re: main jet Reply #6 - 05/02/07 at 22:00:00 man don't have one to measure - seems like a reasonable thickness - I would think the diameter is fairly important as well - seems to me it's about 1/16" larger diameter than a Large round jet head
Back to top	IP Logged

Savage_Rob Serious Thumper Alliance Member Offline Mechanically Inclined Amateur Posts: 6972 Texas (Dallas area) Gender:	Re: main jet Reply #7 - 05/03/07 at 06:17:06 On the fiche for the '86 model, it's item #17, WASHER Part #13382-03110 (replaces 13332-44080), as noted above by Reelthing.
Back to top	1998\|MAC muffler\|ceramic coated header\|K&N air filter\|Amal Mk2 carb\|Odyssey battery\|iridium plug\|NC windshield\|Dunlop 491s\|Superbrace\|EBC brake rotor\|12.5" Progressive shocks\|Kuryakyn ISO grips IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home