Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Shopping list for engine teardown
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
Shopping list for engine teardown (Read 1 times)
steveh
Ex Member
Shopping list for engine teardown
01/07/07 at 06:03:16
I'm going to tear down as far as the head and rejet the carb. Here is my shopping list so far:
permatex ultra copper
plug cap seal
rh side cover gasket
head gasket
oil filter and o ring
Is there anything else I should add to the list?
Anything else I should check or replace while I'm in there?
Is there any better source for parts than the local Suzuki dealer?
Back to top
IP Logged
Kropatchek
Serious Thumper
Offline
Why more than 1
cylinder?
Posts: 1457
Alphen a/d Rijn Netherlands
Gender:
Re: Shopping list for engine teardown
Reply #1 -
01/07/07 at 06:22:14
When you have the RH cover off you can check the camchain-tensioner.
If it is out by 18 mm or more, but still not bent, you need to to replace the chain and the aft guide.
The rockers in the headcover and the camshaft can be examined at the time; replace as required.
Good wrenching
Kropatchek
Back to top
Never ask your bike to scream before her throat is warm.
'93 Sav in '96 ( yellow) looks
IP Logged
splash07
Serious Thumper
Offline
Posts: 911
Charleston, SC
Gender:
Re: Shopping list for engine teardown
Reply #2 -
01/07/07 at 10:04:55
you should also get some anti sieze, red and blue loctite, engine degreaser, and carb cleaner. electrical contact cleaner is good for cleaning off old gaskets too.
I would also recomend going ahead and buying the gasket and o-ring kit, you never know what your going to encounter once you start tearing the thing down.
Back to top
IP Logged
justin_o_guy
Ex Member
Re: Shopping list for engine teardown
Reply #3 -
01/07/07 at 10:21:47
B-12 Chemtool is some really good stuff. I use El-Cheapo WalMart brand brake parts cleaner to get things cleaned up & Chemtool to get the ElCheapo stuff off.
All that stuff is no good to breathe. I keep A fan blowing across the work area . Good luck,,
Back to top
IP Logged
Savage_Greg
Serious Thumper
Alliance Member
Offline
Don't go around your
ass to reach your
elbow...
Posts: 7844
SW Washington State
Gender:
Re: Shopping list for engine teardown
Reply #4 -
01/07/07 at 10:50:20
steveh wrote
on 12/31/69 at 16:00:01:
I'm going to tear down as far as the head and rejet the carb. Here is my shopping list so far:
permatex ultra copper
plug cap seal
rh side cover gasket
head gasket
oil filter and o ring
Is there anything else I should add to the list?
Anything else I should check or replace while I'm in there?
Is there any better source for parts than the local Suzuki dealer?
I don't see High Temp Silicone Sealer for the head cover.
You can also get some of those little gaskets that go under a few of the bolts on the headcover and the RH side cover.
If you are pulling the head, then you may want to consider replacing the 4 copper washers that go under the head nuts. They get gouged and scraped when torqued a few times. They are cheap.
How old is the bike?
Back to top
IP Logged
Max_Morley
Serious Thumper
Offline
LT650 Luxury Touring
& sidecar rig
Posts: 1490
Moses Lake. WA
Gender:
Re: Shopping list for engine teardown
Reply #5 -
01/07/07 at 11:21:07
There is also a small formed 8 shaped oring that goes under the cover, I would order it also as mB-i-L's leaks now. I have them to put in both rides soon.
Back to top
Max at Thumper Acres. '96 Savage bagger, '03 Savage w/Cozy sidecar for wifeni.
IP Logged
Savage_Greg
Serious Thumper
Alliance Member
Offline
Don't go around your
ass to reach your
elbow...
Posts: 7844
SW Washington State
Gender:
Re: Shopping list for engine teardown
Reply #6 -
01/07/07 at 17:53:39
Max_Morley wrote
on 12/31/69 at 16:00:01:
There is also a small formed 8 shaped oring that goes under the cover, I would order it also as mB-i-L's leaks now. I have them to put in both rides soon.
That's right! Forgot that one....
And make sure you don't pinch it during reassembly
Back to top
IP Logged
steveh
Ex Member
Re: Shopping list for engine teardown
Reply #7 -
01/07/07 at 18:21:20
The bike is a 97 with 5000 miles that sat (for years?) unrepaired. The po put on a head from an 87 with 15k. As far as I know, all the other parts are from the 97.
And thanks for all the input!
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/22/24 at 14:25:54
›
General Category
›
Rubber Side Down!
› Shopping list for engine teardown
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.