SuzukiSavage.com - Input on aftermarket Tach and speedo -NO RANTINGS!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Input on aftermarket Tach and speedo -NO RANTINGS!

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Input on aftermarket Tach and speedo -NO RANTINGS! (Read 11 times)

smokin_blue

Serious Thumper

Offline

From Cafes to
Streetfighters! I
build them all!

Posts: 830
St. Paul, MN
Gender: male

Input on aftermarket Tach and speedo -NO RANTINGS!
12/21/06 at 04:06:50

Ok, I want to hear from anyone that has used or is using an aftermarket tach or speedo (sorry no bike computers please)

I want to know what you use(d), (brand, place of purchase, etc) and how well it worked.

I DON'T WANT ANY RANTINGS about a tach doesn't belong on a cruiser, etc. I am building a fully custom Cafe bike with the savage motor in it. IT WILL HAVE A TACH (and chain drive too!) I need to find a tach and speedo that will match that I can mount to the triple clamps I will be using (not a problem) and that perferbably look like the belong with each other. I am currently thinking electronic pickup on both so that I can get rid of the speedo cable from the savage engine and also get rid of the error I will induce if I change the final ratio. I have started looking at what drag specialties carries but I want to hear from anyone that has used a tach.

Thanks!

Paul

My website http://street-unique.com

IP Logged

justin_o_guy Ex Member	Re: Input on aftermarket Tach and speedo -NO RANTI Reply #1 - 12/21/06 at 06:27:31 Reelthing has one with a tach & a temp gauge that ( I think) replaces the oil filler cap. I would be interested in those mods after I get mine running like I want it.
Back to top	IP Logged

Kropatchek Serious Thumper Offline Why more than 1 cylinder? Posts: 1457 Alphen a/d Rijn Netherlands Gender:	Re: Input on aftermarket Tach and speedo -NO RANTI Reply #2 - 12/21/06 at 07:57:32 Here's the tach I use to full satisfaction. Expensive though. And here's the oiltemp. gauge in stead of the oilfiller plug: Bit difficult to see when riding. Greetz Kropatchek BTW The OEM speedo goes and the hole in the tank will be closed. Don't know how jet.
Back to top	Never ask your bike to scream before her throat is warm. '93 Sav in '96 ( yellow) looks IP Logged

Savage Librarian

Serious Thumper

Offline

One Hoopy Frood

Posts: 524
Houston area
Gender: male

Re: Input on aftermarket Tach and speedo -NO RANTI
Reply #3 - 12/21/06 at 15:19:32

I have the cheapest speedometer JCWhitney sells on my Savage at the moment. I believe it was $35 or so. It runs accurate, as far as I've been able to determine. The only flaws are that I haven't gotten around to hooking up the light (makes it hard to ride at night), and the scale (reads for up 120mph, I think) makes it a little difficult to keep within the speed limit at times (almost all of my riding is at 30-50mph).

It looks nice, very simple and clean. That's ir to the right of the tank.

Life is not a journey to the grave with the intention of arriving safely, in one pretty and well preserved piece, but to skid in broadside, used-up, worn out, and defiantly shouting 'Geronimo!!!'

IP Logged

Ed L. Serious Thumper Alliance Member Offline "We All go a Little Crazy Sometimes" Norman Bates Posts: 2808 Sunny Florida Gender:	Re: Input on aftermarket Tach and speedo -NO RANTI Reply #4 - 12/21/06 at 19:21:38 I've been using a small engine digital tach from Northern Hydralics for the last two years. Cost was under $30.00 and so far I've had no problems with it.
Back to top	Silver '02, clubman handle bars, Cobra headlight, Sportster muffler, K+N stock air filter, 152.5 main, Superbrace, oil cooler, 1/2 inch aluminium plate forward controls, spark advance, goes like stink IP Logged

smokin_blue Serious Thumper Offline From Cafes to Streetfighters! I build them all! Posts: 830 St. Paul, MN Gender:	Re: Input on aftermarket Tach and speedo -NO RANTI Reply #5 - 12/22/06 at 04:41:11 Thanks everyone...I will do some digging and comparing. Greetz, what brand is yours do you know? I like the look of it. Savage Librarian, what is the pick up on yours? electronic off a wheel sensor? Thanks Paul
Back to top	My website http://street-unique.com IP Logged

thumperclone Serious Thumper Alliance Member Offline PGR rider riding with respect Posts: 6044 Grand Junction Colorado Gender:	Re: Input on aftermarket Tach and speedo -NO RANTI Reply #6 - 12/22/06 at 07:17:38 Dakota Digital has combo instruments pricey but sleek and digital..@ j&p cycles .com ...metric catalog, electrical dash speedo section..
Back to top	standing for those who stood for US IP Logged

Kropatchek Serious Thumper Offline Why more than 1 cylinder? Posts: 1457 Alphen a/d Rijn Netherlands Gender:	Re: Input on aftermarket Tach and speedo -NO RANTI Reply #7 - 12/22/06 at 08:19:04 smokin_blue wrote on 12/31/69 at 16:00:12: Greetz, what brand is yours do you know? I like the look of it. Thanks Paul As I remember it's Baron. Kropatchek
Back to top	Never ask your bike to scream before her throat is warm. '93 Sav in '96 ( yellow) looks IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: Input on aftermarket Tach and speedo -NO RANTI Reply #8 - 12/22/06 at 19:20:34 If you're looking to replace the speedo and add a tach, check out the veypor vr1 or 2. It gives you that and a fuel gage and performance metering. Add a billet case and it looks ok.
Back to top	Versey's Place Tech Section Index IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home