SuzukiSavage.com - Starter switch from Intruder VS700 800

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Starter switch from Intruder VS700 800

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Starter switch from Intruder VS700 800 (Read 2 times)

theikeman

Senior Member

Offline

Live each day as if
it were your last
...

Posts: 344
Gibsonton in South Florida
Gender: male

Starter switch from Intruder VS700 800
07/10/06 at 21:30:08

I just bought a 1986 Savage to restore and the ignition switch only works sometimes (off or park only) with the key. Probably a mismatch and the key won't work in the tank at all. My question is, will the ignition switch of a Intruder VS800 or 700 work? The green plug looks the same?
For some reason they are half the price of LS650 switches with keys. Any ideas???
Thanks

Ike

1996 Just bought it, Maroon, so much to do, so little time ... Future adds: Iridium, dyna muff, air filter mod, fork brace, 1 piece seat, carb mod and more

IP Logged

Kropatchek Serious Thumper Offline Why more than 1 cylinder? Posts: 1457 Alphen a/d Rijn Netherlands Gender:	Re: Starter switch from Intruder VS700 800 Reply #1 - 07/11/06 at 04:23:16 Could be that the wires have been pinched. Open up the loom and check all the wires. Happened to me some time ago when I was mofifying the rear blinkers and movem the loom of the ignition switch. Greetz Kropatchek 8)
Back to top	Never ask your bike to scream before her throat is warm. '93 Sav in '96 ( yellow) looks IP Logged

theikeman Senior Member Offline Live each day as if it were your last ... Posts: 344 Gibsonton in South Florida Gender:	Re: Starter switch from Intruder VS700 800 Reply #2 - 07/11/06 at 08:25:37 Thanks for the tip, but this is a mechanical issue, when the switch turns it is from off to park and back, it won't stop at the start (on)position, probably a key problem. Thanks
Back to top	1996 Just bought it, Maroon, so much to do, so little time ... Future adds: Iridium, dyna muff, air filter mod, fork brace, 1 piece seat, carb mod and more IP Logged

enophile Full Member Offline 1998 Savage, black, mostly stock Posts: 116 Morgantown, WV Gender:	Re: Starter switch from Intruder VS700 800 Reply #3 - 07/11/06 at 15:11:32 I'm not familiar with the Intruder switches. However, if it can be physically mounted to the frame then it will work. If the plugs aren't the same, you can easily wire it work by cutting and splicing. Does the dealer have one in stock? If so, take yours in and see how it compares.
Back to top	The number of cylinders isn't important...it's how you use them. IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home