SuzukiSavage.com - Installed 7in Harley Headlight

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Installed 7in Harley Headlight

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Installed 7in Harley Headlight (Read 18 times)

USCG Cremeans Ex Member	Installed 7in Harley Headlight 03/25/06 at 14:49:04 I got a 7 in. Harley headlight and put it on the savage yesterday, i think it looks a lot better, here are some pics: Install was a breeze, just drilled a new hole and hooked up the three wires.
Back to top	IP Logged

Savage_Rob Serious Thumper Alliance Member Offline Mechanically Inclined Amateur Posts: 6972 Texas (Dallas area) Gender:	Re: Installed 7in Harley Headlight Reply #1 - 03/25/06 at 17:55:17 Very cool option over the plastic OEM bucket.
Back to top	1998\|MAC muffler\|ceramic coated header\|K&N air filter\|Amal Mk2 carb\|Odyssey battery\|iridium plug\|NC windshield\|Dunlop 491s\|Superbrace\|EBC brake rotor\|12.5" Progressive shocks\|Kuryakyn ISO grips IP Logged

caruso81

YaBB Newbies

Offline

Posts: 7
Sherman, TX
Gender: male

Re: Installed 7in Harley Headlight
Reply #2 - 04/20/06 at 21:12:18

Stupid question....I am replacing a headlight with a Drag Specialties headlight. How did you know which of the Suzuki wires to attach to your new headlight wires. The replacement light has no labels. I know which is which on the Suzuki, but it uses different colors. Black to black, I guess, but I wonder how good trial and error on the other two wires would be for the bike.
Thanks,
Wayne Crannell

IP Logged

Serious Thumper
2005 No Login

Offline

Professional
"scooter
trash".

Posts: 5207
Rosemark TN
Gender: male

Re: Installed 7in Harley Headlight
Reply #3 - 04/22/06 at 21:17:44

Unhook your headlight pigtail block from the back of your stock bulb. The block is labeled as to which wire runs what circuit. Easiest way? Plug your stock harness onto the back of the new headlight bulb. If need be, pop one wire at a time out of the block, feed into the headlight bucket, and reconnect to the block. That's how I installed my 5.75" bottom mount headlight. Metal of course, since my tool roll ate the stock bucket, and the wreck tore off the Rebel headlight I had on there.
-WD

On 2 wheels since 7/87

Black and Chrome 2003 1950s style custom

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home