Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
Upper Fork diameter - Flyscreen owners (Read 4 times)
PerrydaSavage
Serious Thumper
Alliance Member
*****
Offline

Riding "The
Rock"!

Posts: 3522
Republic of Newfoundland
Gender: male
Upper Fork diameter - Flyscreen owners
12/18/04 at 08:20:35
 
8)Got my new Nat. Cycle Flyscreen from e-bay yesterday ... sweet! Anyhoo, it comes with a variety of different thickness rubber gaskets to go between the fork mtg. brackets and the fork itself ... a little chart tells you which gaskets to select depending on the diameter of your forks ... Question; what is the diameter in millimeters of the upper fork legs of the Savage ... I don't have a micrometer, so I tried measuring with an adjustable wrench (to simulate a micrometer) and a tape measure ... got approx. 35mm? Is this right? The chart included with the Flyscreen gives different gasket selections for 33, 34.6 & 35mm.
Back to top
 
 

Before you diagnose yourself with depression or low self-esteem, first make sure you are not, in fact, just surrounded by arseholes!
WWW   IP Logged
Kropatchek
Serious Thumper
*****
Offline

Why more than 1
cylinder?

Posts: 1457
Alphen a/d Rijn  Netherlands
Gender: male
Re: Upper Fork diameter - Flyscreen owners
Reply #1 - 12/18/04 at 08:44:12
 
Recall an earlier post . Diameter is 38 mm ( as measured with the micrometer)

Greetz
Kropatchek Grin
Back to top
 
 

Never ask your bike to scream before her throat is warm.
'93 Sav in '96 ( yellow) looks
  IP Logged
PerrydaSavage
Serious Thumper
Alliance Member
*****
Offline

Riding "The
Rock"!

Posts: 3522
Republic of Newfoundland
Gender: male
Re: Upper Fork diameter - Flyscreen owners
Reply #2 - 12/19/04 at 10:50:46
 
GrinThanks! 38mm it was! The proper gaskets for a 38mm dia. fork were supplied with the shield ... worked like a charm! Managed to install the Flyscreen this afternoon ... was a bit chilly working in my unheated shed (temp was -4deg C or approx. 27deg F), but installed the shield on with a minimum of cuss words!
Here's a pic of the installed shield;
Back to top
 
 

Before you diagnose yourself with depression or low self-esteem, first make sure you are not, in fact, just surrounded by arseholes!
WWW   IP Logged
Tony
Full Member
2004 No Login
***
Offline



Posts: 102
Saugerties, NY
Gender: male
Re: Upper Fork diameter - Flyscreen owners
Reply #3 - 05/29/05 at 05:40:40
 
Does anyone know the diameter of the lower forks? I am contemplating adding a set of running "Fog" lights low on the forks as an added way to be seen.
Back to top
 
 

-Tony

......Remember;
Where ever you go,
there you are.
  IP Logged
Michael
Ex Member




Re: Upper Fork diameter - Flyscreen owners
Reply #4 - 05/29/05 at 17:04:27
 
PerrydaSavage wrote on 12/31/69 at 16:00:12:
was a bit chilly working in my unheated shed (temp was -4deg C or approx. 27deg F),



Geesh perry.....Didn't know it was still going below zero there....we are having daytime highs of about 15-20, and nightime lows of about 8-10 in New Brunswick. but the friggin rain won't stop....3 full sunny days all may.

cheers


Michael
Back to top
 
 
  IP Logged
Kropatchek
Serious Thumper
*****
Offline

Why more than 1
cylinder?

Posts: 1457
Alphen a/d Rijn  Netherlands
Gender: male
Re: Upper Fork diameter - Flyscreen owners
Reply #5 - 05/30/05 at 05:51:40
 
Tony wrote on 12/31/69 at 16:00:05:
Does anyone know the diameter of the lower forks? I am contemplating adding a set of running "Fog" lights low on the forks as an added way to be seen.


Upper end of the lower tubes 57.88 mmm (2.2785")
Lower portion 49.06 (1.9315")

Oh, I love those digital, switchable ( mm to inch) vernier calipers, everybody should have one.

Greetz
Kropatchek Grin
Back to top
 
 

Never ask your bike to scream before her throat is warm.
'93 Sav in '96 ( yellow) looks
  IP Logged
LANCER
Serious Thumper
Alliance Member
*****
Offline

Savage Beast
Performance Parts

Posts: 10606
Oklahoma
Gender: male
Re: Upper Fork diameter - Flyscreen owners
Reply #6 - 05/30/05 at 09:48:14
 
They are fun, aren't they?
Back to top
 
 
  IP Logged
PerrydaSavage
Serious Thumper
Alliance Member
*****
Offline

Riding "The
Rock"!

Posts: 3522
Republic of Newfoundland
Gender: male
Re: Upper Fork diameter - Flyscreen owners
Reply #7 - 05/31/05 at 00:33:14
 
Quote:
Geesh perry.....Didn't know it was still going below zero there....we are having daytime highs of about 15-20, and nightime lows of about 8-10 in New Brunswick. but the friggin rain won't stop....3 full sunny days all may


Hi Michael ... ahhhh, it was -4C (27F) when I installed my shield on Dec. 19th last year (note post date Wink)

All same bud ... we're having a rather cool, wet Spring here in eastern Nfld. ... daytime highs of about 10C, nitetime lows around 2-4C ... certainly less than ideal Ridin' weather ...
Back to top
 
 

Before you diagnose yourself with depression or low self-esteem, first make sure you are not, in fact, just surrounded by arseholes!
WWW   IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
05/18/24 at 09:42:06



General CategoryRubber Side Down! › Upper Fork diameter - Flyscreen owners


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.