SuzukiSavage.com - Wiring for 96 igniter?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Wiring for 96 igniter?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Wiring for 96 igniter? (Read 18 times)

Aeres

Ex Member

Wiring for 96 igniter?
03/28/07 at 13:03:30

I just installed a 96 engine in an 86 frame. I also have the 96 igniter box but the connectors are different than the 86 version. I would like to use the new igniter unit but I need the specific pin locations for the box. I have the matching connector body and pins for the new unit, but that's it.

Can anyone help me identify the pin locations for a 96 igniter?

Thanks!!

Dave

IP Logged

vroom1776 Serious Thumper Offline Posts: 2110 Gender:	Re: Wiring for 96 igniter? Reply #1 - 03/28/07 at 13:14:05 Mysterious electrical system simplified wiring for a '97 uh, what year is the wiring harness for?
Back to top	IP Logged

Aeres Ex Member	Re: Wiring for 96 igniter? Reply #2 - 03/28/07 at 13:17:16 Thanks for that. Can you tell me the pin numbers on the igniter module and match that to the wiring color codes? I don't see that there. Cheers, Dave
Back to top	IP Logged

Aeres Ex Member	Re: Wiring for 96 igniter? Reply #3 - 03/28/07 at 13:18:28 The harness that is on the bike is an 86, and the igniter module is a 96.
Back to top	IP Logged

vroom1776 Serious Thumper Offline Posts: 2110 Gender:	Re: Wiring for 96 igniter? Reply #4 - 03/28/07 at 13:18:41 best i can do is try and take a pic tonight of my 1997 model... also, take a look at the mysterious... link. I'm not sure if that info is in there, though...
Back to top	IP Logged

Aeres Ex Member	Re: Wiring for 96 igniter? Reply #5 - 03/28/07 at 13:21:46 If I can't find a wiring diagram that explains it, maybe someone can go to their 96 - (?) bike and jot down the color codes and match them to the pin positions. That would let me figure it out.
Back to top	IP Logged

tx650

YaBB Newbies
2005 No Login

Offline

I love YaBB 1G -
SP1!

Posts: 7

Re: Wiring for 96 igniter?
Reply #6 - 03/28/07 at 22:37:56

The 96 should have a 8 pin connector,2 rows of 4 each. Looking at the ignitor itself the top row of pins,left to right: 1 orange/white(+12V in) 2 Green(crank sensor), 3 Orange(crank sensor) 4 Black/White(Ground)
Second Row left to right: 5 black/yellow(Ignition coil) 6 black(start relay) 7&8 are not connected.
The colors should be the same on your 86 harness. I ran a later ignitor on my 88 for a while without any problems.Left the ignition on and cooked the original ignitor and took a while to round up parts to repair it.

IP Logged

vroom1776

Serious Thumper

Offline

Posts: 2110

Gender: male

Re: Wiring for 96 igniter?
Reply #7 - 03/29/07 at 00:12:06

diagram time!

Sounds like the 97 diagram should work for an 86... what
year is the decomp controler from?

just checked the ignitor on my 97:

1: Black/Yellow tracer -> ignition coil;
2: Black, no tracer -> starter relay
3: no wire
4: no wire
5: Orange/White tracer -> ignition coil & kill/start switch = + 12V
6: Green, no tracer -> magneto pickup coil
7: Orange, no tracer -> magneto pickup coil
8: Black/White tracer -> ground

IP Logged

Aeres

Ex Member

Re: Wiring for 96 igniter?
Reply #8 - 03/29/07 at 00:31:54

Excellent work guys!! That will do me just fine!!

I have been to the Suzuki dealership, the salvage yards, the public library, (and of course all over the web) and there is nothing. You guys saved my a$$!!

Thanks a million!

By the way, the decomp controller is the 86 (everything except the igniter and the engine itself is from the 86)

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home