SuzukiSavage.com - Threaded frame studs for rear brake pedal spinning

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Threaded frame studs for rear brake pedal spinning

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Threaded frame studs for rear brake pedal spinning (Read 23 times)

valdezdelbx YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 2	Threaded frame studs for rear brake pedal spinning 06/30/19 at 18:41:10 Anyone ever have the threaded studs that hold the rear brake pedal assy and fwd exhaust heat shield spin in the frame? The way it catches here and there makes it seem like there's something i should be able to do to get it to tighten up.
Back to top	IP Logged

badwolf

Serious Thumper

Offline

Ridin' my Lil'
Bagger - 153k miles
so far

Posts: 793
Palm Beach County, FL
Gender: male

Re: Threaded frame studs for rear brake pedal spin
Reply #1 - 06/30/19 at 18:58:17

Those aren't studs. They are thru bolts. Look on the other side and you will see the heads of the bolts.
They go thru the engine and when you loosen them expect some oil leakage, normal.
You will have to remove them whenever you remove the exaust header or remove the right side cover. ( like to check the cam chain tensioner )

IP Logged

valdezdelbx YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 2	Re: Threaded frame studs for rear brake pedal spin Reply #2 - 07/01/19 at 04:46:32 Ah, perfect, that explains the oil too. Guess I wasn't paying attention after a day of doing a new exhaust, rejetting and replacing fork seals...I'll blame it on that...
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home