SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Technical Documents/Reference >> Mikuni / Dynojet jet size comparison
/cgi-bin/YaBB.pl?num=1104263751

Message started by Nightrain on 12/28/04 at 11:55:51

Title: Mikuni / Dynojet jet size comparison
Post by Nightrain on 12/28/04 at 11:55:51

*found this on another board. looks to be accurate, I know this has been discussed here in the past*

Mikuni / Dynojet Size Comparison Chart

Mikuni--Dynojet
140-----149.3
150
142.5---152.0
145-----154.7
155
147.5---157.3
150-----160
152.5---162.7
165
155-----165.3
157.5---168.0
170
160-----170.7
162.5---173.3
175
165-----176.0
167.5---178.7
180
170-----181.3
172.5---184.0
185
175-----186.7
177.5---189.3
190
180-----192.0
182.5---194.7
195
185-----197.3
187.5---200
190-----202.7

Title: Re: Mikuni / Dynojet jet size comparison
Post by verslagen1 on 12/24/11 at 13:41:45

DynoJet jets are marked according to the diameter of the hole in the jet.
ie: DJ150 = 1.5mm and DJ175 = 1.75mm.

This is not true for Mikuni or most other OEM equivalent jets.
This size Mikuni jet, (N102.221 Super BN), is marked according to its' flow rate.
ie: 150 = a rating of 150 cc of fuel per minute.