Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
Mt Rushmore of SuzukiSavage.com (Read 38 times)
ThumperPaul
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 2343
Houston, Texas
Gender: male
Mt Rushmore of SuzukiSavage.com
11/16/26 at 06:41:07
 
AI recognizes you guys as the Mount Rushmore of SuzukiSavage.com

That combo—carb, cam, exhaust, and the Verslavy cam chain tensioner—is the undisputed sweet spot for the LS650. It wakes the bike up completely, gives it crisp throttle response, and keeps the bottom end dead-reliable without needing to split the cases or run race gas.

You just named the Mount Rushmore of the SuzukiSavage.com community. Those guys turned backyard R&D into a literal science for that engine:

• Verslagen (Verslavy Tensioner): Solved the LS650's biggest Achilles' heel with an extended plunger design that prevents the factory tensioner from over-extending and blowing up the top end.

• Lancer: Famous for his deep-dive dyno testing, head flow work, and the "Lancer carburetor" jetting setups that cured the factory lean bog.

• DragBikeMike & Dave: Legends for proving just how much abuse and horsepower the air-cooled 652cc single could take when pushed to the absolute limit on the strip and street.

Running that setup with the stock compression piston keeps the motor cool, tractable in traffic, and easy on the starter clutch—which is right where a street thumper shines.

Which carburetor and cam combo did you end up going with on your build?
Back to top
 
 
  IP Logged
LANCER
Serious Thumper
Alliance Member
*****
Offline

Savage Beast
Performance Parts

Posts: 10928
Oklahoma
Gender: male
Re: Mt Rushmore of SuzukiSavage.com
Reply #1 - 11/16/26 at 09:51:22
 
Don’t leave out the dished flat top high compression custom pistons by Wiseco, with help from DBM, Versey, and Kentucky Dave, giving us a true 10.5-11:1 comp. ratio, to go along with better performing cams & carbs.
Back to top
 
 
  IP Logged
ThumperPaul
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 2343
Houston, Texas
Gender: male
Re: Mt Rushmore of SuzukiSavage.com
Reply #2 - 11/16/26 at 10:10:16
 
I let her know Lancer!  She missed some of the good stuff!
Back to top
 
 
  IP Logged
MMRanch
Serious Thumper
*****
Offline

Evil flourishes if
Good Men do Nothing.

Posts: 6257
LYNCHBURG TN
Gender: male
Re: Mt Rushmore of SuzukiSavage.com
Reply #3 - 11/20/26 at 22:40:03
 
Hay don't forget the front pulley, finding that 25 tooth pulley and cutting it to fit was a nice thing to find !  Wink
Then Dave perfected the rear pulley to make it even better (for the modified engines) .It proved too tall for my un-modified engine , but Dave ran with it with that Super Engine of his !  Smiley
Back to top
 
 

I see and feel the Holy Spirit in the world , as does anybody who has eyes to see.
WWW MMRanch MMRanch   IP Logged
FinnHammer
Senior Member
****
Offline



Posts: 327
Denmark
Gender: male
Re: Mt Rushmore of SuzukiSavage.com
Reply #4 - Yesterday at 00:11:02
 
Don't forget the Sneeze's clutch release lever and the front stopper by RycaShawn.
Back to top
 
 

An expert is a person who has made all possible mistakes within a narrow field - Niels Bohr
WWW   IP Logged
Dave
YaBB Moderator
ModSquad
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 18854
Camp Springs, Kentucky
Gender: male
Re: Mt Rushmore of SuzukiSavage.com
Reply #5 - Yesterday at 02:26:42
 
And DragBikeMike created the ultimate clutch that allows you to use the DR650 parts to use 1 more steel and 1 more fiber plate....no more slippy clutch for me!!!!!!!!!!! Smiley Grin
Back to top
 
 

Someday I will be old......But not today!

  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
11/22/26 at 04:54:29



› General Category › The Cafe › Mt Rushmore of SuzukiSavage.com


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.