SuzukiSavage.com - Anyone measured the engine dimensions?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Anyone measured the engine dimensions?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Anyone measured the engine dimensions? (Read 30 times)

faffi Senior Member Offline A.S.A.N. Posts: 342 Norway	Anyone measured the engine dimensions? 12/03/24 at 15:03:23 Hi! I wonder if anyone knows how tall the engine is? Useful to know in order to learn if a more traditional frame can house the Savage engine.
Back to top	IP Logged

JOG Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1485 Longview, Texas Gender:	Re: Anyone measured the engine dimensions? Reply #1 - 12/03/24 at 15:39:55 You want that in twelfths of a foot or millis of a meter?
Back to top	IP Logged

faffi

Senior Member

Offline

A.S.A.N.

Posts: 342
Norway

Re: Anyone measured the engine dimensions?
Reply #2 - 12/03/24 at 22:32:28

JOG wrote on 12/03/24 at 15:39:55:

You want that in twelfths of a foot or millis of a meter?

I would prefer two left feet and a thumb of rule, actually Grin

Perhaps I should have asked the question differently; have anyone fitted a Savage engine to a "standard" frame, like that of a GS400 or similar? I would expect not, but if possible, that would have been ideal. Another option would be a frame that already houses a big single, like that of the DR650.

The reason for my question is that I love the looks and the gentle tune of the Savage engine, but the frame leaves a lot to be desired for me, as I would like to have the engine in a standard-ish frame, or make a good scrambler/tracker. Doing so based on the stock frame would never obtain the right look without serious modification.

IP Logged

faffi Senior Member Offline A.S.A.N. Posts: 342 Norway	Re: Anyone measured the engine dimensions? Reply #3 - 12/04/24 at 13:35:42 Benelli Mojave frame BSA B50 Northon Featherbed Apparently, the LS650 engine also fit the BSA A7/A10 frame. So there are options.
Back to top	IP Logged

JOG Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1485 Longview, Texas Gender:	Re: Anyone measured the engine dimensions? Reply #4 - 12/04/24 at 13:40:52 Maybe you should pick a frame with the ergonomics that would suit you and see if it will work
Back to top	IP Logged

faffi Senior Member Offline A.S.A.N. Posts: 342 Norway	Re: Anyone measured the engine dimensions? Reply #5 - 12/05/24 at 11:24:36 A sensible tip. But I think it is easier to modify ergonomics that change the frame, which will also likely demand a new tank etc. Or perhaps I should just import an ST400 and fit it with a 650 engine But that will be a very costly bike, likely closer to 10k USD.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home