I have some Ryca parts bought in 2013 and I have their rearsets without a brake stop.

I heard they updated their design at some point to add a brake stop. Does anyone have pictures of this design?

I have the RYCA setup on my Cafe' bike, and I built a replacement aluminum clamp with a built in brake stop.  It works really well - but it does require that you have a pretty good supply of tools to make it.

I removed the round clamping sleeve that holds the pedal in place, and made one from aluminum that has a bump for drilling and tapping a stud to act as the brake stop.  This required several tools (band saw, drill press, tap, files and drum sander) to get it built.

The cable is to activate the brake light, and the setup is a bit weird looking - but it allowed the cable to be installed as straight as possible.  The inner cable is mounted stationary - the moving brake cable causes the cable sleeve to move.  This functions the same way as the normal cable would - but it is not the common way cables are activated.

I like that Dave , I might use a variation of that on the tracker. Think I redrilled anchor point for backing plate spring and readjusted cam , yes rear brake operates moving pedal up or down. I’ve gotten use to it , put my toe under brake pedal so I don’t roll backwards on incline and that’s about all I use the rear brake for. But a simple solution to that problem I’ve learned to live with , yeah I’ll steal that !