SuzukiSavage.com - Ryca rearsets - updated brake stop?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Ryca rearsets - updated brake stop?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Ryca rearsets - updated brake stop? (Read 23 times)

thomasoconnor19 Full Member Offline SuzukiSavage.com Rocks! Posts: 148	Ryca rearsets - updated brake stop? Yesterday at 19:17:40 I have some Ryca parts bought in 2013 and I have their rearsets without a brake stop. I heard they updated their design at some point to add a brake stop. Does anyone have pictures of this design?
Back to top	IP Logged

JOG Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1074 Longview, Texas Gender:	Re: Ryca rearsets - updated brake stop? Reply #1 - Today at 00:23:58 IIRC they went outta business.
Back to top	IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18142
Camp Springs, Kentucky
Gender: male

Re: Ryca rearsets - updated brake stop?
Reply #2 - Today at 02:14:07

I have the RYCA setup on my Cafe' bike, and I built a replacement aluminum clamp with a built in brake stop. It works really well - but it does require that you have a pretty good supply of tools to make it.

I removed the round clamping sleeve that holds the pedal in place, and made one from aluminum that has a bump for drilling and tapping a stud to act as the brake stop. This required several tools (band saw, drill press, tap, files and drum sander) to get it built.

IMG_4103.JPG

« Last Edit: Today at 03:29:23 by Dave »

Someday I will be old......But not today!

IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18142
Camp Springs, Kentucky
Gender: male

Re: Ryca rearsets - updated brake stop?
Reply #3 - Today at 03:32:27

Initially the stop was just the metal bolt - but the "click" sound every time I let off the brake was annoying, and the impact would slowly cause the clamp to rotate and loosen the mounting bolt for the peg.

I added the rubber tube as a sleeve to quiet the noise and cushion the impact. Eventually when I had the location to my liking I added a small screw on the backside to stop the collar from rotating and lock it into place.

IMG_4104.JPG

Someday I will be old......But not today!

IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18142
Camp Springs, Kentucky
Gender: male

Re: Ryca rearsets - updated brake stop?
Reply #4 - Today at 03:35:56

The cable is to activate the brake light, and the setup is a bit weird looking - but it allowed the cable to be installed as straight as possible. The inner cable is mounted stationary - the moving brake cable causes the cable sleeve to move. This functions the same way as the normal cable would - but it is not the common way cables are activated.

IMG_4105.JPG

Someday I will be old......But not today!

IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18142 Camp Springs, Kentucky Gender:	Re: Ryca rearsets - updated brake stop? Reply #5 - Today at 03:40:53 You might be able to duplicate this by making a plate that mounts behind your rearset pedal and has a hole drilled/tapped for the screw that I used as a stop. This would move your peg/pedal out a small amount - I would think that 1/8" steel would be strong enough as the return spring is not very strong.
Back to top	Someday I will be old......But not today! IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home