Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› HD Dyna Muffler Installation (65747-94)
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
HD Dyna Muffler Installation (65747-94) (Read 9 times)
ThumperPaul
Serious Thumper
Online
SuzukiSavage.com
Rocks!
Posts: 1665
Houston, Texas
Gender:
HD Dyna Muffler Installation (65747-94)
Today
at 07:31:27
This turned out really nice if I say so myself.
A couple things I did…
1) used a 4” coupler between the pipe and muffler (1.75” ID, 1.75” OD). The additional net length is about 2” and allowed me to use 2 channel bolts to connect the muffler (muffler rail) to the muffler mount on the bike (rather than 1 bolt as many people have done).
2) used an Emgo reducer to fill the void between the 1.67” header outlet and 1.75” ID end of the coupler.
3) a pair of really solid clamps to hold the coupler to the header pipe and muffler at each end. The heat shield and good placement of the crank bolts hid those pretty good.
4) a 6” - 1.75” heat shield described as being for a Harley.
5) to get the final fit right, I had to add 4 washers on the channel bolts between the muffler rail and the muffler mount. Without those 4 washers, the muffler wants to touch the rear brake cable.
Really pleased with this! IMO - It looks like it was factory designed for the bike. I didn’t like the way the Dyna went together and fit on a previous Savage I had.
Back to top
IMG_5513-compressed.jpeg
IP Logged
ThumperPaul
Serious Thumper
Online
SuzukiSavage.com
Rocks!
Posts: 1665
Houston, Texas
Gender:
Re: HD Dyna Muffler Installation (65747-94)
Reply #1 -
Today
at 07:35:16
And here’s a pic where I shimmed up with washers on the channel bolts to get about 5mm clearance between the muffler and brake cable. Kinda hard to see with all the shiny reflection of the muffler.
Back to top
IMG_5514-compressed.jpeg
IP Logged
DragBikeMike
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 4398
Honolulu
Re: HD Dyna Muffler Installation (65747-94)
Reply #2 -
Today
at 15:36:43
That is a Super-Sano install Paul. Did you have to put a kink in the 4” coupler? Howzabout some more detail on those solid clamps. Where did you get them?
Very nice job.
Back to top
Knowledge is power.
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/19/24 at 17:50:08
›
General Category
›
Rubber Side Down!
› HD Dyna Muffler Installation (65747-94)
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.