SuzukiSavage.com - slip on 65842-07

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › slip on 65842-07

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

slip on 65842-07 (Read 52 times)

winterwolf2000

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 11

slip on 65842-07
11/28/23 at 07:19:01

ok fighting with this
i put on the slip-on 65842-07 same as the one BH & Boofer
now it says it fits a 1.75 header pipe from the research i did but it seems like i need to go smaller? as i have gap and and its does not to me look like its reduced enough
i did not cut it because it suppose to fit it. am i wrong do i need to pick up a Sleeve Insert Shim Reducer Adapter or cut it and add the green bean can trick? am i just looking at this all wrong

20231128_080034.jpg

IP Logged

winterwolf2000 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 11	Re: slip on 65842-07 Reply #1 - 11/28/23 at 07:20:47 this is the top look
Back to top	20231128_080024.jpg IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18119 Camp Springs, Kentucky Gender:	Re: slip on 65842-07 Reply #2 - 11/28/23 at 08:57:48 You can cut a shim from soda cans, soup cans, etc. Cut a strip that 1.5"-2" wide, and wrap it around until you have enough thickness to fill up the gap.
Back to top	Someday I will be old......But not today! IP Logged

zipidachimp Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1417 surrey, b.c. Gender:	Re: slip on 65842-07 Reply #3 - 11/28/23 at 23:03:20 Works for me: Extra heavy alum foil, muffler cement, cut a 2" wide long strip, fold in half lengthwise, smear one half in muffler cement, fold back, wrap tightly around exhaust 2to3 times, slip on muffler and tighten clamp. Still tight, leak free, after 3 years! Cheers! ps: wear gloves !
Back to top	IP Logged

winterwolf2000 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 11	Re: slip on 65842-07 Reply #4 - 11/29/23 at 02:23:40 thks guys for the help
Back to top	IP Logged

ThumperPaul Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1742 Houston, Texas Gender:	Re: slip on 65842-07 Reply #5 - 12/09/23 at 11:47:14 If you use any muffler sealer or something like Permatex Ultra Copper (high temp), let it fully cure for at least 24 hours depending on heat and humidity. If you don't, it will fail. I made that mistake and it wasn't fun cleaning it up and re-doing it.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home