Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
Fork Seal and Fork Oil Recommendations (Read 56 times)
Anameofsomesort
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 11

Fork Seal and Fork Oil Recommendations
05/31/23 at 23:35:54
 
Need to replace my fork seals and fork oil on my Savage and can't seem to find great information on if I should just go OEM or if there is a better 3rd party option. I would like to put off having to replace them again as long as possible, and that's going to mean getting the best seals I can possibly find.

I also am not sure what weight and exactly how much fork oil each one will need. Does it take 10W, 15W, or 20W? I also would really like an exact measurement of how much to pour into my new forks, ml, oz, cups, I don't really care as I've just planned to use an old measuring cup to get it as exact as I can. Thanks to anyone who can help me out.
Back to top
 
 
  IP Logged
och
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 612

Re: Fork Seal and Fork Oil Recommendations
Reply #1 - 06/01/23 at 18:16:04
 
Use oem fork seals, no idea on oil.
Back to top
 
 
  IP Logged
ohiomoto
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 2673
WTF is JOG?
Re: Fork Seal and Fork Oil Recommendations
Reply #2 - 06/01/23 at 18:22:32
 
OEM seals and any fork oil or ATF.
Back to top
 
« Last Edit: 06/02/23 at 16:54:14 by ohiomoto »  
  IP Logged
Anameofsomesort
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 11

Re: Fork Seal and Fork Oil Recommendations
Reply #3 - 06/01/23 at 18:47:52
 
any clue what weight to get, and how much?
Back to top
 
 
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28732
L.A. California
Gender: male
Re: Fork Seal and Fork Oil Recommendations
Reply #4 - 06/01/23 at 22:31:19
 
Anameofsomesort wrote on 06/01/23 at 18:47:52:
any clue what weight to get, and how much?

10wt and a little less than 1/2 liter.
Back to top
 
 
WWW   IP Logged
Anameofsomesort
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 11

Re: Fork Seal and Fork Oil Recommendations
Reply #5 - 06/01/23 at 22:42:03
 
verslagen1 wrote on 06/01/23 at 22:31:19:
Anameofsomesort wrote on 06/01/23 at 18:47:52:
any clue what weight to get, and how much?

10wt and a little less than 1/2 liter.


Thank you so much! So pouring in a little under 500ml into my measuring cup will do it? I guess I'll shoot for like 480-490ml.
Back to top
 
 
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28732
L.A. California
Gender: male
Re: Fork Seal and Fork Oil Recommendations
Reply #6 - 06/02/23 at 07:09:08
 
Anameofsomesort wrote on 06/01/23 at 22:42:03:
verslagen1 wrote on 06/01/23 at 22:31:19:
Anameofsomesort wrote on 06/01/23 at 18:47:52:
any clue what weight to get, and how much?

10wt and a little less than 1/2 liter.


Thank you so much! So pouring in a little under 500ml into my measuring cup will do it? I guess I'll shoot for like 480-490ml.

Forgot to say that was in each tube.
Back to top
 
 
WWW   IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28732
L.A. California
Gender: male
Re: Fork Seal and Fork Oil Recommendations
Reply #7 - 06/02/23 at 07:12:00
 
Did you know there are a couple of posts on fork seals in the tech section?

slavy wrote on 10/24/05 at 23:11:37:
If You play Your cards right it is a piece of cake.

You will need a piece of PVC pipe with an inner diameter 38mm to drive the new fork seal. You can get it in the plumbing section of almost every ACE or Home Depot
Put a jack under the bike and remove the fr. wheel and fr. fender. Unscrew the top fork caps. Remove one of the forks. Put the cap back and tighten it lightly. Turn the fork upside down and put it into a vise.DO NOT SQUEEZE THE TUBE. Squeeze where the axle goes. Take a long allen socket. Install it in the allen bolt that will be facing up and wack it nice about 10 times/this will loosen the tight threads. If You have an impact driver , use it to take the darn bolt out. Pull the fork from the vise and let it drain in a pan. Pull the dust seal up, using a small screwdriver. Using the same tool pop out the retaining clip that is under the dust seal and holds the fork seal. Grab the Alum. part with one hand and the chrome tube in the other and slide them in opposite direction as many times as it takes to take the assy apart. Slide the old seal out. Install the assy back. Using the PVC pipe install the big washer that is under the seal. After the metal washer is installed all the way in, install the new seal the same way /MAKE SURE THE LETTERS AND NUMBERS ARE FACING UP/. Install the retaining clip and the dust seal. Turn the fork upside - down and fill 441 ml /14.9 oz/ thru the bolt hole on the bottom. put the allen bolt back in the hole and tighten it good. Repeat the procedure with the other fork. Have fun !

Back to top
 
 
WWW   IP Logged
och
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 612

Re: Fork Seal and Fork Oil Recommendations
Reply #8 - 06/02/23 at 10:13:11
 
By the way, before you replace the seal, give Seal Mate a chance. It helped me for several month, probably could've been a permanent fix if I didn't have a fork brace.
Back to top
 
 
  IP Logged
ohiomoto
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 2673
WTF is JOG?
Re: Fork Seal and Fork Oil Recommendations
Reply #9 - 06/02/23 at 17:05:27
 
Anameofsomesort wrote on 06/01/23 at 18:47:52:
any clue what weight to get, and how much?
-----------------

The valving in these forks is pretty crude.  I don't think you will notice much difference between oil weights, but 5wt to 15wt would work fine.  

And don't sell ATF short.   It works perfectly fine in these types of forks and is/was often specified by manufacturers on motorcycles with lower-end suspension forks.      
Back to top
 
 
  IP Logged
Anameofsomesort
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 11

Re: Fork Seal and Fork Oil Recommendations
Reply #10 - 06/03/23 at 23:27:05
 
verslagen1 wrote on 06/02/23 at 07:12:00:
Did you know there are a couple of posts on fork seals in the tech section?

slavy wrote on 10/24/05 at 23:11:37:
If You play Your cards right it is a piece of cake.

Take a long allen socket. Install it in the allen bolt that will be facing up and wack it nice about 10 times/this will loosen the tight threads. If You have an impact driver , use it to take the darn bolt out.



So I don't necessarily need an impact driver, a simple allen bolt and a rubber mallet should loosen it up enough? Should I just use my drill to undo it when I've loosened it enough?
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
03/28/24 at 10:15:42



General CategoryRubber Side Down! › Fork Seal and Fork Oil Recommendations


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.