Hey everyone, I had another troubleshooting thread that turned into an entire rebuild, but this feels like maybe a separate thing. My apologies if the mods rather me keep this in my other thread.
Relevant mods thus far include:
Raptor Petcock
Wiseco Piston stock size
Versy head plug
Modified Cam Chain Tensioner
Mikuni VM36 carb from Murray's Carbs
Barnett Clutch
I understand the clutch has no bearing on the carburetor, but the engine seems to be bogging down and knocking when I pull the lever in. The motorcycle otherwise runs good, but when I pull in the clutch it will bog down or even stall once it's been running. Here are some video examples:
Pulling clutch in just neutral:
https://imgur.com/a/XhXVVwgClutch pulled and shift into first:
https://imgur.com/a/143mdbnI've replaced the clutch pack with a Barnett kit. The original basket, inner hub, and pressure plate were also replaced due to pitting and me hoping it was clutch drag. I also ordered all 3 sizes for the pushrods and installed the middle sized one so maybe I should try the larger one? Maybe I put it together wrong? Seems weird that it would happen the same way twice, but I could just be consistently mistaken.
Any ideas are welcome and appreciated.