Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
Tail light housing (Read 73 times)
LuckyLuna
Junior Member
**
Offline

SuzukiSavage.com
Rocks!

Posts: 65

Tail light housing
06/23/22 at 06:15:14
 
So finally got my new tires on, running great, no squeeks.... And while repositioning my parking job I drop it (kickstand wasnt fully down so it flipped up) and broke the left rear turn signal housing. Is there an easy way to remove the housing so i can epoxy and clamp the housing/arm or is removing the whole thing involve cutting wires and major deconstruction?
Back to top
 
 
  IP Logged
TheSneeze
Serious Thumper
*****
Offline



Posts: 1201
Northern Nevada
Gender: male
Re: Tail light housing
Reply #1 - 06/23/22 at 06:40:49
 
Tail light or turn signal?  I have some of both if you want to just replace it.
Back to top
 
 

Every twenty minute job is a stripped thread away from being a three day ordeal.

'87 LS650h Savage Street Tracker
'86 LS650g Savage (parts bike)
'81 Kawasaki KZ750e ELR tribute
  IP Logged
LuckyLuna
Junior Member
**
Offline

SuzukiSavage.com
Rocks!

Posts: 65

Re: Tail light housing
Reply #2 - 06/23/22 at 06:49:59
 
Left turn signal, let me see how this epoxy job works and I'll let you know if I'll need a replacement.
Back to top
 
 
  IP Logged
justin_o_guy2
Serious Thumper
*****
Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.
Re: Tail light housing
Reply #3 - 06/23/22 at 07:31:23
 
I didn't remove mine to epoxy them. You can get something, anything that will stick with epoxy and put in one side of the busted part, in a Coupla places, let That cure. Then you can test fit, if you like it, add epoxy. Super glue any place epoxy missed.
If the stem is busted you can put a groove in it and lay a piece of piano wire in on the bottom.
A picture might be helpful
Back to top
 
 

The people never give up their liberties but under some delusion.- Edmund Burke.
  IP Logged
LuckyLuna
Junior Member
**
Offline

SuzukiSavage.com
Rocks!

Posts: 65

Re: Tail light housing
Reply #4 - 06/23/22 at 09:18:10
 
I work 12hrs so its in the parking lot taped up while the epoxy sets. When I get out I'll try to snap a picture.
Back to top
 
 
  IP Logged
justin_o_guy2
Serious Thumper
*****
Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.
Re: Tail light housing
Reply #5 - 06/23/22 at 12:56:22
 
Hopefully it won't be all crooked and solid as a rock
Back to top
 
 

The people never give up their liberties but under some delusion.- Edmund Burke.
  IP Logged
Ruttly
Serious Thumper
*****
Offline

Thumpers Rule

Posts: 4955
Manteca , CA
Gender: male
Re: Tail light housing
Reply #6 - 06/24/22 at 02:56:32
 
Go ahead , Ask him how he knows
Back to top
 
 

The Topic Terminator
  IP Logged
justin_o_guy2
Serious Thumper
*****
Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.
Re: Tail light housing
Reply #7 - 06/24/22 at 09:44:01
 
Low blow,Rut,low blow..
I'm not saying it's Wrong,, just saying,, an inch below the belt,,
Back to top
 
 

The people never give up their liberties but under some delusion.- Edmund Burke.
  IP Logged
Ruttly
Serious Thumper
*****
Offline

Thumpers Rule

Posts: 4955
Manteca , CA
Gender: male
Re: Tail light housing
Reply #8 - 06/24/22 at 13:01:23
 
Now I gotta do a belt buckle joke too ?
Back to top
 
 

The Topic Terminator
  IP Logged
justin_o_guy2
Serious Thumper
*****
Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.
Re: Tail light housing
Reply #9 - 06/24/22 at 16:36:40
 
Duude, if you have one,, go for it!
Back to top
 
 

The people never give up their liberties but under some delusion.- Edmund Burke.
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
03/28/24 at 02:11:50



General CategoryRubber Side Down! › Tail light housing


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.