DragBikeMike
Serious Thumper
Offline
SuzukiSavage.com Rocks!
Posts: 4408
Honolulu
|
Wheelbender, is the white wire going to the bolt your ground for the outlet? If so, that is a very poor location for a ground wire. The bolt holds your plastic airbox to the frame. The wire is pinched between the bolthead and the washer. The washer contacts the plastic tab. That's a terrible ground. You need to secure the ground wire up hard against bare metal on the frame or engine. Remove any paint so the wire is hard against the clean, bare metal.
Is this your ground for the outlet? If so, you need to relocate the ground connection.
|