SuzukiSavage.com - Kuryakyn ISO grips?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Kuryakyn ISO grips?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Kuryakyn ISO grips? (Read 50 times)

och Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 629	Kuryakyn ISO grips? 05/27/22 at 18:00:30 I've been thinking about these grips as our bikes vibrate quite a bit. Kuryakyn sells a set of universal grips, do they fit our bikes?
Back to top	IP Logged

cwoflyboy YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 5	Re: Kuryakyn ISO grips? Reply #1 - 05/30/22 at 10:26:29 They fit. I put them on mine (and the two previous bikes I’ve had. Love them. Somewhere on the forum there’s a post that gives the right model number. For me, clutch side went on fine. Throttle side I had to shave the ribs on the plastic throttle piece and still had a difficult time. Well worth the price and effort.
Back to top	IP Logged

och Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 629	Re: Kuryakyn ISO grips? Reply #2 - 05/30/22 at 11:45:48 I ordered the universal set, hopefully they fit.
Back to top	IP Logged

och Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 629	Re: Kuryakyn ISO grips? Reply #3 - 06/11/22 at 19:47:29 och wrote on 05/30/22 at 11:45:48: I ordered the universal set, hopefully they fit. Man, I got the throttle side on almost on, and it shewed up the upper rubber ring, and I could not pull it out. Ended up cutting the ring off, seems to work fine.
Back to top	IP Logged

och

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 629

Re: Kuryakyn ISO grips?
Reply #4 - 06/14/22 at 10:26:08

Done did it. It was a bit of a pain in the ass due to my bar end mirrors - the bars in my bike are not hollow, there is a flange on both sides about 1/2" in, so I welded 1" long spacers that extend out from the bars, and made a 1/4"-20 hole in each to bolt the mirrors to. Had to enlarge the hole in the grips to fit over the spacers, but everything is nice and solid now. The spacers also double up as bar weights to further reduce vibrations.

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home