Does anyone remember what wire to cut at back of ignition switch to delete parking light option ? Unable to find the old post , think it was the brown wire nearest the red wire , just not sure or was it the gray wire or the other brown wire. The only thing for sure it’s not the red or the orange wire.

I cut the brown wire nearest the red wire , it only gets hot when key is turned to the “P” position. Diagram only shows 4 wires but there are 5 , 2 brown wires. I was adding a switched hot lead for a gps speedo and wanted to delete the parking light option. I have read about people killing their batteries by leaving it in the “P” position and pulling the key not knowing the tail light is on !

Tanx

Tanx