Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1 2 
Send Topic Print
Modified Pulley Spacer (Read 183 times)
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Modified Pulley Spacer
01/10/22 at 12:28:47
 
So, this is for the Drag Bike Mike developed rear pulley dewobbleization fix.
Basically, you remove the rear wheel and the puller carrier, remove the left side seal and the OEM single row bearing, and install a double row bearing (which you've sourced from wherever you want to). And install this incredibly trick modified left side spacer.
When it's all over, you'll have the most wobble resistant rear pulley you can imagine!
Just send me $30 for the spacer and shipping, and send back your original one when you get the modified one. If you use Paypal, make sure you send it as money to a friend, or they take a bite.

Here is the link to the original DragBikeMike article:
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1561964431
Back to top
« Last Edit: 01/25/22 at 00:18:53 by Armen »  

Savage_Modified_Spacers.jpg

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
Jdvt600
Junior Member
**
Offline

SuzukiSavage.com
Rocks!

Posts: 83

Re: Modified Pulley Spacer
Reply #1 - 01/10/22 at 12:36:26
 
Armen,

You still have to heat the carrier for this one correct?
Back to top
 
 
  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Re: Modified Pulley Spacer
Reply #2 - 01/10/22 at 12:39:00
 
Heating makes it a lot easier. I always cringe when I see someone bludgeoning a bearing in or out cold. Much potential to loosen up the fit.
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
edgwoodri
Junior Member
**
Offline

SuzukiSavage.com
Rocks!

Posts: 57

Re: Modified Pulley Spacer
Reply #3 - 01/15/22 at 10:59:30
 
Can you make me one?
My bike is getting new (used ) 18" wheels, new tank, new seat, and modified Cam chain tensioner. might as well
do it all.

Anyone recognize what this tank comes from?
Back to top
 

IMG_9535.jpg
  IP Logged
edgwoodri
Junior Member
**
Offline

SuzukiSavage.com
Rocks!

Posts: 57

Re: Modified Pulley Spacer
Reply #4 - 01/15/22 at 11:09:34
 
Basic early mock-up
Back to top
 

IMG_9527.jpg
  IP Logged
Dave
YaBB Moderator
ModSquad
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 17738
Camp Springs, Kentucky
Gender: male
Re: Modified Pulley Spacer
Reply #5 - 01/15/22 at 11:56:50
 
That tank is likely GT380/GT550.
Back to top
 
 

Someday I will be old......But not today!

  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Re: Modified Pulley Spacer
Reply #6 - 01/15/22 at 13:33:41
 
Send you a PM.
Thanks!
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
TBR125
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 41

Re: Modified Pulley Spacer
Reply #7 - 01/17/22 at 12:51:06
 
That's the color scheme used on the 1972 GT550. Wish those tanks were still cheap.
Back to top
 
 
  IP Logged
Dan P
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 25
Northern Nevada
Gender: male
Re: Modified Pulley Spacer
Reply #8 - 01/22/22 at 08:24:06
 
Armen, Where do you source the double sized bearing ?  Is there a part number for it ?  Thank you
Back to top
 
 
  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Re: Modified Pulley Spacer
Reply #9 - 01/22/22 at 08:31:13
 
IIRC, 5305-2RS
EBay is as good as anyplace, unless you have a good bearing supplier.
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
Dan P
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 25
Northern Nevada
Gender: male
Re: Modified Pulley Spacer
Reply #10 - 01/23/22 at 07:29:18
 
Thanks Armen,  Anyway you can contact me as I have a few questions and will need your shipping info. Thanks Dan
Back to top
 
 
  IP Logged
Dan P
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 25
Northern Nevada
Gender: male
Re: Modified Pulley Spacer
Reply #11 - 01/23/22 at 16:44:26
 
Hey Armen, I got your message but a have some questions. I can't respond to your message because I don't have enough posts I guess.  How can we communicate directly ? I can give my email or get yours ? Thanks
Back to top
 
 
  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Re: Modified Pulley Spacer
Reply #12 - 01/24/22 at 15:11:12
 
Dan
I need your address
Got the $
Thanks!
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Re: Modified Pulley Spacer
Reply #13 - 01/24/22 at 15:11:59
 
Dan
oops
Now I see it
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Re: Modified Pulley Spacer
Reply #14 - 06/08/23 at 05:09:09
 
Bump.
I have a few of these ready to ship. $30 including shipping, and you send me your original one.
Thanks
Armen
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
Pages: 1 2 
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
03/29/24 at 06:01:15



General CategoryThe Marketplace › Modified Pulley Spacer


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.