Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Anyone polished the aluminum?
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
Anyone polished the aluminum? (Read 150 times)
TZK
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 58
Anyone polished the aluminum?
12/26/21 at 15:19:26
I'd like to get the aluminum flywheel and clutch cover to shine like the chrome pieces behind them. Any suggestions from people that have done this or know how to do it? I'm guessing that the aluminum has some coating on it to prevent oxidation and this must be removed first, right?
Any help would be greatly appreciated!
Back to top
IP Logged
och
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 629
Re: Anyone polished the aluminum?
Reply #1 -
12/26/21 at 15:24:53
You can polish it to a mirror finish just like stainless steel, but right after you need to protect it with clear coat against oxidation.
Back to top
IP Logged
Gary_in_NJ
Serious Thumper
Offline
LS650 Cafe Racer
Posts: 2633
Amongst the Twisty Roads
Re: Anyone polished the aluminum?
Reply #2 -
12/26/21 at 15:47:39
400g
800g
1,200g
2,000g
All lubed with WD-40.
Polish with a polishing wheel. If you don’t ride in the rain, you’ll never need to polish them again.
Back to top
A life-time student of motorcycling.
LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS
My LS650=>
http://suzukisavage.com/yabb2.2/Attachments/Left.JPG
IP Logged
Dave
YaBB Moderator
ModSquad
Offline
SuzukiSavage.com
Rocks!
Posts: 18117
Camp Springs, Kentucky
Gender:
Re: Anyone polished the aluminum?
Reply #3 -
12/26/21 at 15:49:35
I did it to my bike in 2012. I used "Aircraft" stripper to remove the clear coat, then progressive grits of sandpaper to get the aluminum smooth and shiny (320 and 360 on corroded places - then 400, 600 on smooth areas) - then used a buffing wheel to get the shine. If you don't have the power equipment then you need to keep going with the finer grits of sandpaper (800, 1000, 1500, 2000) and buff by hand using clothes and polish.
I have tried lots of different metal polish including Flitz, Simichrome, and others. The best I have ever found is the polish from Griots Garage. It keeps the metal from tarnishing longer than the others.
My bike is stored indoors and I try to avoid riding in the rain whenever possible. I need to clean/polish the aluminum once or twice each year to keep it looking good. If you bike is stored outdoors and/or gets wet often you will need to do it more than I do. I never put my bike away wet - except if we are camping and it gets rained on I don't have a choice.
Shiny aluminum looks great - but it is more work to keep it nice.
If your bike is a commuter and/or sits outside - I am not sure you want to have bare aluminum......it will be a lot of work.
Back to top
IMG_9566.JPG
Someday I will be old......But not today!
IP Logged
TZK
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 58
Re: Anyone polished the aluminum?
Reply #4 -
12/26/21 at 18:24:51
Thanks, guys for the advice.
I'm thinking of ordering this sanding kit. The discs are 2 inch. Is that a good size?
https://www.amazon.com/Sanding-80-3000-Sandpaper-Buffering-Assortment/dp/B07Q...
Back to top
IP Logged
Dave
YaBB Moderator
ModSquad
Offline
SuzukiSavage.com
Rocks!
Posts: 18117
Camp Springs, Kentucky
Gender:
Re: Anyone polished the aluminum?
Reply #5 -
12/27/21 at 02:03:46
I don't believe that kind of a sander will work very well on the engine cases. The swirly action that results from trying to use a drill powered disc on a curved surface will be very difficult (impossible) to control.
This is how a professional would do it.
https://www.youtube.com/watch?v=9qDC1b-1WhI
This is how you do it by hand:
https://www.youtube.com/watch?v=eZzRmj-fXTY
https://www.youtube.com/watch?v=DaBiKHDOlzE
https://www.youtube.com/watch?v=DaBiKHDOlzE
Back to top
Someday I will be old......But not today!
IP Logged
TZK
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 58
Re: Anyone polished the aluminum?
Reply #6 -
12/27/21 at 10:02:03
Thanks, Dave. I was under the impression that it would be too labor intensive to do this by hand but if that guy can do his whole airboat then I'm sure I can do the motorcycle. I'll be sure to post photos when it's done.
BTW my bikes are garaged and the S40 will be used mainly as a learner bike for my wife so it won't be used in the rain
Back to top
IP Logged
Gary_in_NJ
Serious Thumper
Offline
LS650 Cafe Racer
Posts: 2633
Amongst the Twisty Roads
Re: Anyone polished the aluminum?
Reply #7 -
12/27/21 at 14:44:34
I love rebuilding motorcycles but despise the process of restoring the metal parts. So I built a vapor blaster. If you restore a lot of things, I highly recommend it. Here is a before photo…
Back to top
4AC20353-3B44-4580-8D13-26BE51B3C15C.jpeg
A life-time student of motorcycling.
LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS
My LS650=>
http://suzukisavage.com/yabb2.2/Attachments/Left.JPG
IP Logged
Gary_in_NJ
Serious Thumper
Offline
LS650 Cafe Racer
Posts: 2633
Amongst the Twisty Roads
Re: Anyone polished the aluminum?
Reply #8 -
12/27/21 at 14:45:11
After (and painted)
Back to top
92C8575A-3940-49A8-9F3B-DCDE2174B4BF.jpeg
A life-time student of motorcycling.
LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS
My LS650=>
http://suzukisavage.com/yabb2.2/Attachments/Left.JPG
IP Logged
Dave
YaBB Moderator
ModSquad
Offline
SuzukiSavage.com
Rocks!
Posts: 18117
Camp Springs, Kentucky
Gender:
Re: Anyone polished the aluminum?
Reply #9 -
12/27/21 at 15:11:43
Gary_in_NJ wrote
on 12/27/21 at 14:44:34:
So I built a vapor blaster.
I want one!
The past couple of years I have drooled on the display models they had for sale at the Barber Vintage Festival.
Back to top
Someday I will be old......But not today!
IP Logged
Armen
Serious Thumper
Offline
Half-Witted
Wrench-Jockey from
Jersey
Posts: 1452
Re: Anyone polished the aluminum?
Reply #10 -
12/27/21 at 15:12:59
My bud has a vapor blaster. It changed my whole outlook on life!
Back to top
In theory, theory and reality are the same. In reality, they aren't...
IP Logged
ckahleer
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 121
Re: Anyone polished the aluminum?
Reply #11 -
12/27/21 at 15:29:46
Gary_in_NJ wrote
on 12/27/21 at 14:44:34:
I love rebuilding motorcycles but despise the process of restoring the metal parts. So I built a vapor blaster. If you restore a lot of things, I highly recommend it. Here is a before photo…
OK, I'm sold. But how do you build a vapor blaster?
Back to top
IP Logged
Gary_in_NJ
Serious Thumper
Offline
LS650 Cafe Racer
Posts: 2633
Amongst the Twisty Roads
Re: Anyone polished the aluminum?
Reply #12 -
12/27/21 at 17:29:00
I will post a how to.
Back to top
A life-time student of motorcycling.
LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS
My LS650=>
http://suzukisavage.com/yabb2.2/Attachments/Left.JPG
IP Logged
TZK
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 58
Re: Anyone polished the aluminum?
Reply #13 -
12/28/21 at 10:52:52
Just wondering, could you reapply a clear coat with a rattle can to protect the aluminum after it's polished?
Back to top
IP Logged
badwolf
Serious Thumper
Offline
Ridin' my Lil'
Bagger - 153k miles
so far
Posts: 805
Palm Beach County, FL
Gender:
Re: Anyone polished the aluminum?
Reply #14 -
12/28/21 at 13:09:56
Normal rattlecan clear can do a so-so job on parts that don't heat up, like the fork lowers, triple clamps, and risers. But won't hold up on the engine.
There is some 2 part epoxy rattlecan clear you can get, but it costs more and once you break the seal you must use it up in a day or two.
https://www.amazon.com/Spray-Refinishing-Permanent-Surfaces-3680061/dp/B0043B...
Back to top
IP Logged
Pages:
1
2
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
10/06/24 at 07:19:56
›
General Category
›
Rubber Side Down!
› Anyone polished the aluminum?
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.