Thanks for the tips. This is the kit I bought.
https://www.ebay.com/itm/232519004595It's by Sumo and I used all the parts available. I'm fairly novice so I though replacing all the parts would be best to have it run optimal. Probably just needed cleaning and a new spark plug in hindsight.
At the moment since I didn't find any fuel leaks after draining some oil and retesting I moved on to working on the front brakes.
I changed the disk and started rebuilding the front caliper but the gunk in the outer seal groove is so bad I can't get it cleaned enough to properly seat a new seal properly. I tried to force the piston in but it just shredded the new outer seal. I'm just going to buy a new caliper to make sure I have a healthy brake system.
I'm going to test the the carb float with a rubber hose attached to the fuel drain plug as recommended before making any further adjustments.
I'll keep you all updated.