SuzukiSavage.com - Chunk of metal and shavings in Carb

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Chunk of metal and shavings in Carb

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Chunk of metal and shavings in Carb (Read 51 times)

Savagez123

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 2

Chunk of metal and shavings in Carb
11/02/21 at 12:15:16

Hello all.

95 Savage, 24k miles, Owned for three years.

I was going about 70mph when the engine shut down (rattling noise, smoke, coasted to the side of road).

The guy at the shop said it was likely blown rings, as there was oil coming out of the exhaust. However, upon removing the carb I found a huge chunk of metal an many shavings. (see pics).

I was planning to hone and replace rings for the fix, but the shavings and chunk of metal seem like a larger issue.

Is this a scrap situation?

Please advise. Thanks.

Carb_1_001.jpg

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28890 L.A. California Gender:	Re: Chunk of metal and shavings in Carb Reply #1 - 11/02/21 at 12:23:44 likely you dropped a valve. full tear down is in order.
Back to top	Versey's Place Tech Section Index IP Logged

Savagez123 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 2	Re: Chunk of metal and shavings in Carb Reply #2 - 11/02/21 at 12:31:17 Looks like I have a winter project. Thanks for the quick response.
Back to top	IP Logged

justin_o_guy2

Serious Thumper

Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.

Re: Chunk of metal and shavings in Carb
Reply #3 - 11/03/21 at 11:23:45

Used engines aren't that expensive.
If you didn't wreck the jug,A complete head unit with the head cover that it was wearing when the factory punched the hole for the cam will be more likely to work out than buying a head and sticking another head cover on. That Can work out, but it can also not work great.
As long as the piston isn't holed and it didn't lose anything from under that went into the crankcase, then worry about junk having messed stuff up Down in There is not an issue.
If the engine just wound down but didn't clank and cease to turn, that would be good.
Okay, less Crappy..
Sorry to hear it,

The people never give up their liberties but under some delusion.- Edmund Burke.

IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18117 Camp Springs, Kentucky Gender:	Re: Chunk of metal and shavings in Carb Reply #4 - 11/03/21 at 15:15:32 I got some used engines....and some used parts. Where are you located?
Back to top	Someday I will be old......But not today! IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home