Fast 650
Senior Member
Offline
SuzukiSavage.com Rocks!
Posts: 405
Valrico, FL
Gender:
|
The Intruder speedometer is easy to adapt. There is a hole in the Intruder mount, just tap it for M6 and use a short screw to clamp it to the crown. The indicator light cluster is different so you will have to rewire that to match the Savage. Easiest way is to simply add wire to the Savage indicator harness to make it long enough to reach the Intruder cluster. Intruders have a single turn indicator, neutral, high beam, and an oil pressure light. The colored lenses have a locator tab so they only fit one way, Trim the tabs off and you can move the lenses to suit your tastes. I used the neutral and high beam lenses, and made two amber lenses for the turn indicators.
As Versy stated, the tach cable from a 70's GT750 fits perfectly.
If you have the buckhorn bars you will have to change over to the drag bars to clear the light cluster. Intruders use the same risers so if you have drag bars you are set.
|