SuzukiSavage.com - Tiny solid cylinder under clutch cover

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Tiny solid cylinder under clutch cover

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1

Tiny solid cylinder under clutch cover (Read 47 times)

Matt Cremeens YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 4	Tiny solid cylinder under clutch cover 10/14/21 at 08:36:21 So I found this tiny solid cylinder that fell out while I was replacing clutch cover gasket and have no idea where it came from? I can’t find any points where it sits as a guide or anything! Referred to manual but no avail. Any ideas? Thanks
Back to top	5FEF2A92-F7DE-4EEB-A46B-C3BAD29082B7.jpeg IP Logged

Matt Cremeens YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 4	Re: Tiny solid cylinder under clutch cover Reply #1 - 10/14/21 at 08:37:17 Sorry forgot to mention this is a 2005 ls650 if that helps anything.
Back to top	IP Logged

badwolf Serious Thumper Offline Ridin' my Lil' Bagger - 153k miles so far Posts: 802 Palm Beach County, FL Gender:	Re: Tiny solid cylinder under clutch cover Reply #2 - 10/14/21 at 09:15:51 It appears to be #18 in this breakdown. The pin that locks the oil pump drive gear to the clutch basket. Without it the oil pump wont turn. https://www.dropbox.com/s/k1m8m72cxbsnf2q/exploded%20clutch.pdf?dl=0
Back to top	IP Logged

Matt Cremeens YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 4	Re: Tiny solid cylinder under clutch cover Reply #3 - 10/14/21 at 09:52:15 I pulled clutch basket and this is what I found. Looks to be welded together. Is it possible it went here and they left in the case by accident? I don’t know anything about bikes so this is a cheap project I bought to tinker with.
Back to top	58032FBA-2F95-40B3-9DB1-B453939C668D.jpeg IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: Tiny solid cylinder under clutch cover Reply #4 - 10/14/21 at 10:43:00 Yeah, that looks like the pin. I don't know any reason it couldn't be welded together instead of pinned.
Back to top	Versey's Place Tech Section Index IP Logged

Pages: 1

« Home