Yes, check the fuse. under the seat, right side.

The power from the relay only goes to the starter... not the rest of the bike.
You may have other problems too.

Ok so I did check the fuses and I unwrapped the wiring harness because I don't understand why this is happening I thought I'd figure it out by now. Any way I have one red wire coming from the starter solenoid, then it splits into two reds and both go to one side of my relay then one comes out goes to starter switch then the other one goes to another relay I believe but then the power goes to everything from there. My problem is unless I connect the power pin to the pin that goes to the starter on the relay I have no power to anything connect those and I get power to everything except the coil and my push start. Power goes into the relay but won't come out idk why also it's a new relay and I have two other ones that are the same and they all do the same thing